My Cart

EL Splitter Connector

1.4 €1.40

Availability: Retired

Introduction

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make sure that the total length of EL does not exceed what the inverter can drive!
Specification
  • Use our splitters to add more wire to your Inverters and Sequencers
  • Total Length: 40cm (16")
  • Can be connected to any of our Inverters and EL Wire
  • One Piece
  • Has one Male Connector and 4 Female Connectors
  • Can also be used with Sequencers (must have additional female connector on the end of the sequencer connector wire)
Shipping List
  • Splitter Connector(1 unit)

Description

Introduction

If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make sure that the total length of EL does not exceed what the inverter can drive!
Specification
  • Use our splitters to add more wire to your Inverters and Sequencers
  • Total Length: 40cm (16")
  • Can be connected to any of our Inverters and EL Wire
  • One Piece
  • Has one Male Connector and 4 Female Connectors
  • Can also be used with Sequencers (must have additional female connector on the end of the sequencer connector wire)
Shipping List
  • Splitter Connector(1 unit)

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: