My Cart

DIY Remote Control Robot Kit (Support Android)

162.15 €162.15

Availability: Retired

This basic robot is intended for you to create a small autonomous or remote controlled robot. Although the kit includes all essential parts to make an autonomous robot, it is intended to allow you to add your own electronics in order to satisfy your objectives.Giving a robot life is amazing. The great thing is that you can make your robot have its own personality. You can program it to react to obstacles in its own unique way. We provide some sample codes you can use to understand how the robot operates and observe its DFRobot personality.

SPECIFICATION

  • Overall
    • 4WD Mobile platform Motors: 3-12V DC 
    • peed: 90cm/s 
    • Dimensions: 200mm x 170mm x 105mm 
  • Microcontroller
    • DC Supply:USB Powered or External 6V~23V DC
    • DC Output:5V(2A) / 3.3V DC
    • Motor driver Continuous Output Current:2A
    • Microcontroller:ATmega32u4
    • Bootloader: Arduino Leonardo
    • Compatible with the Arduino R3 pin mapping
    • Analog Inputs: A0-A5, A6 - A11 (on digital pins 4, 6, 8, 9, 10, and 12)
    • PWM: 3, 5, 6, 9, 10, 11, and 13. Provide 8-bit PWM output
    • 5 key inputs for testing
    • Auto sensing/switching external power input
    • Serial Interface
      • TTL Level
      • USB
    • Support Male and Female Pin Header
    • Built-in Xbee socket
    • Integrated sockets for APC220 RF Module and DF-Bluetooth Module
    • Three I2C/TWI Interface Pin Sets(two 90°pin headers)
    • Two way Motor Driver with 2A maximum current
    • Size:89x84x14mm
  • Motor Specification
    • Gear Ratio 1:120
    • No-load speed(3V):100RPM
    • No-load speed(6V):200RPM
    • No-load current(3V):60mA
    • No-load current(6V):71mA
    • Stall current(3V):260mA
    • Stall current(6V):470mA
    • Torque (3V): 1.2Kg/cm
    • Torque (6V): 1.92Kg/cm
    • Size: 55mm x 48.3mm x 23mm

DOCUMENTS

SHIPPING LIST

  • ROB0003 - 4WD Mobile Platform (Arduino Controller Supported) x1
  • DFR0225 - Romeo V2-All in one Controller x1
  • DFR0107- IR Kit For Arduino x1
  • FIT0063 - 10 sets M3 * 10 hexagonal standoffs mounting kit x1
  • SER0020 - DF05BB Standard Servo (5kg) x1
  • FIT0030 - Jumper Wires 9" F/F Pack of 10 x1
  • TEL0026 - DFRobot Bluetooth V3 x1
  • TEL0002 - Bluetooth Adapter Mini x1
  • SEN0019 - Adjustable Infrared Sensor Switch x3
  • SEN0001 - URM37 V3.2 Ultrasonic Sensor x1 
  • FIT0006 - URM ultrasound mounting bracket x1

Description

This basic robot is intended for you to create a small autonomous or remote controlled robot. Although the kit includes all essential parts to make an autonomous robot, it is intended to allow you to add your own electronics in order to satisfy your objectives.Giving a robot life is amazing. The great thing is that you can make your robot have its own personality. You can program it to react to obstacles in its own unique way. We provide some sample codes you can use to understand how the robot operates and observe its DFRobot personality.

SPECIFICATION

  • Overall
    • 4WD Mobile platform Motors: 3-12V DC 
    • peed: 90cm/s 
    • Dimensions: 200mm x 170mm x 105mm 
  • Microcontroller
    • DC Supply:USB Powered or External 6V~23V DC
    • DC Output:5V(2A) / 3.3V DC
    • Motor driver Continuous Output Current:2A
    • Microcontroller:ATmega32u4
    • Bootloader: Arduino Leonardo
    • Compatible with the Arduino R3 pin mapping
    • Analog Inputs: A0-A5, A6 - A11 (on digital pins 4, 6, 8, 9, 10, and 12)
    • PWM: 3, 5, 6, 9, 10, 11, and 13. Provide 8-bit PWM output
    • 5 key inputs for testing
    • Auto sensing/switching external power input
    • Serial Interface
      • TTL Level
      • USB
    • Support Male and Female Pin Header
    • Built-in Xbee socket
    • Integrated sockets for APC220 RF Module and DF-Bluetooth Module
    • Three I2C/TWI Interface Pin Sets(two 90°pin headers)
    • Two way Motor Driver with 2A maximum current
    • Size:89x84x14mm
  • Motor Specification
    • Gear Ratio 1:120
    • No-load speed(3V):100RPM
    • No-load speed(6V):200RPM
    • No-load current(3V):60mA
    • No-load current(6V):71mA
    • Stall current(3V):260mA
    • Stall current(6V):470mA
    • Torque (3V): 1.2Kg/cm
    • Torque (6V): 1.92Kg/cm
    • Size: 55mm x 48.3mm x 23mm

DOCUMENTS

SHIPPING LIST

  • ROB0003 - 4WD Mobile Platform (Arduino Controller Supported) x1
  • DFR0225 - Romeo V2-All in one Controller x1
  • DFR0107- IR Kit For Arduino x1
  • FIT0063 - 10 sets M3 * 10 hexagonal standoffs mounting kit x1
  • SER0020 - DF05BB Standard Servo (5kg) x1
  • FIT0030 - Jumper Wires 9" F/F Pack of 10 x1
  • TEL0026 - DFRobot Bluetooth V3 x1
  • TEL0002 - Bluetooth Adapter Mini x1
  • SEN0019 - Adjustable Infrared Sensor Switch x3
  • SEN0001 - URM37 V3.2 Ultrasonic Sensor x1 
  • FIT0006 - URM ultrasound mounting bracket x1

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: