My Cart

Dissolved Oxygen sensor

340 €340.00

Availability: In stock

Dissolved Oxygen sensor for Waspmote Smart Water sensor board

Add to Compare


The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 5 parameters, including the most relevant for water control such as dissolved oxygen, oxidation-reduction potential, pH, conductivity and temperature.

Sensor type: Galvanic cell
Range: 0~20mg/L
Accuracy: ±2%
Maximum operation temperature: 50ºC
Saturation output: 33mV ±9mV
Pressure: 0~100psig (7.5Bar)
Calibration: Single point in air
Response Time: After equilibration, 2 minutes for 2mV

You will be able to calibrate this sensor using DO Calibration Solution

For more information, see the following article.

Waspmote Quick Tutorial
Waspmote Smart Water Technical Guide
Waspmote Site 
Waspmote Technical Guides 
Sensor Boards Technical Guides 
Networking Guides 
Developers Forum 
50 Applications with Waspmote 
FAQ: Waspmote Vs. Arduino

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: