My Cart

Conductivity Calibration Kit, K=1

23 €23.00

Availability: In stock

Conductivity Calibration Kit (K=1) for Waspmote Smart Water sensor board

Add to Compare


The Smart Water model has been conceived to facilitate the remote monitoring of the most relevant parameters related to water quality. With this platform you can measure more than 5 parameters, including the most relevant for water control such as dissolved oxygen, oxidation-reduction potential, pH, conductivity and temperature.

10.5mS and 40mS at 25ºC
125ml each

Note: The concentration value may vary in each batch with respect to the value shown in the photo. The sticker in each bottle indicates the exact value.

For more information, see the following article.

Waspmote Quick Tutorial
Waspmote Smart Water Technical Guide
Waspmote Site 
Waspmote Technical Guides 
Sensor Boards Technical Guides 
Networking Guides 
Developers Forum 
50 Applications with Waspmote 
FAQ: Waspmote Vs. Arduino

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: