My Cart

CAN Bus Shield for Raspberry Pi

75 €75.00

Availability: In stock

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

This kit includes:
- CAN Bus Module for Arduino, Raspberry Pi and Intel Galileo
- Raspberry Pi to Arduino Shields Connection Bridge

You can also get the OBD-II cable separately.

CAN Bus
Standard ISO 11898
Cabling Twisted pair
Connector DB9
Network Topology Multimaster
Speed 125 to 1000 Kbps
Signaling Differential
Voltage Levels 0-5V
Signals Half Duplex

Documentation:
Tutorial

Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

Qty:
Add to Compare

Description

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

This kit includes:
- CAN Bus Module for Arduino, Raspberry Pi and Intel Galileo
- Raspberry Pi to Arduino Shields Connection Bridge

You can also get the OBD-II cable separately.

CAN Bus
Standard ISO 11898
Cabling Twisted pair
Connector DB9
Network Topology Multimaster
Speed 125 to 1000 Kbps
Signaling Differential
Voltage Levels 0-5V
Signals Half Duplex

Documentation:
Tutorial

Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

Related Tutorials

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

The idea behind the Raspberry Pi to Arduino shields connection bridge is to allow to use any of the shields, boards and modules designed for Arduino in Raspberry Pi.

It includes also the possibility of connecting digital and analog sensors, using the same pinout of Arduino but with the power and capabilities of Raspberry.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: