My Cart

CAN Bus Module for Arduino, Raspberry Pi and Intel Galileo [XBee Socket]

55 €55.00

Availability: In stock

The CAN Bus Module allows to connect electronic control units (ECUs).

This product is compatible with Arduino, Raspberry Pi and Intel Galileo boards.

Qty:
Add to Compare

Description

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

You can also get the OBD-II Cable separately.

CAN Bus
Standard ISO 11898
Cabling Twisted pair
Connector DB9
Network Topology Multimaster
Speed 125 to 1000 Kbps
Signaling Differential
Voltage Levels 0-5V
Signals Half Duplex

Related Tutorials

CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

The Multiprotocol Radio Shield is an interconnection shield for Arduino, and was designed to connect two communication modules at the same time. This that means a lot of possibilities and applications can be made using the cooking-hacks modules.

The Multiprotocol Radio Shield includes the SPI bus connections that allows the use of the RS-485 and CAN Bus modules, but also is compatible with the rest of the cooking-hacks modules as RFID, XBee and Bluetooth.

The current tutorial explains how to take the most of the Galileo board by using on it the Arduino and Raspberry Pi shields and modules designed by Cooking Hacks

Galileo comes with a single-core 32-bit, 400MHz Quark SoC X1000 processor, supports 3.3 or 5 volt shields and has an Ethernet and USB port. Compatible with Windows, Mac OS and Linux, the software of Galileo also has support for the Arduino shield ecosystem.

The idea behind the Raspberry Pi to Arduino shields connection bridge is to allow to use any of the shields, boards and modules designed for Arduino in Raspberry Pi.

It includes also the possibility of connecting digital and analog sensors, using the same pinout of Arduino but with the power and capabilities of Raspberry.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: