My Cart

Bus Blaster V3c for MIPS Kit

43.95 ‚ā¨43.95

Availability: On Demand

Bus Blaster V3c for MIPS is an economical, yet high-speed debug adapter designed for supporting JTAG debug with various MIPS processors. ¬†This version of the Bus Blaster has a 14-pin target connector and interface cable with buffering logic suitable for MIPS EJTAG targets. ¬†In other respects it is the same as the standard Bus Blaster V3c ¬† For MIPS hardware and software debugging, Bus Blaster is recommended to be used with¬†OpenOCD¬†¬†JTAG¬†programming¬†and¬†debugging¬†software¬†which can be downloaded from SourceForge. For software development, compiling, building programs, and source debugging with GDB, the Codescape MIPS SDK Essentials is a free download available from the Imagination Technologies website. Download¬†Codescape¬†SDK¬†Essentials¬†here.¬† ¬† Bus Blaster can be used with various other debugging, programming and boundary scan test software, so there are a rich variety of resources available for your MIPS development project.¬† ¬† Features: ‚ÄĘDesigned¬†for¬†MIPS¬†(EJTAG)¬†targets¬†with¬†14¬†pin¬†connector ‚ÄĘIncludes¬†100¬†cm¬†USB¬†host¬†cable ‚ÄĘIncludes¬†20¬†cm¬†target¬†cable¬†with¬†14¬†pin¬†IDC¬†connectors¬†on¬†each¬†end ‚ÄĘIncludes¬†Bus¬†Blaster¬†acrylic¬†case¬†panels¬†and¬†nylon¬†screws¬†(assembly¬†required)¬† ‚ÄĘBased¬†on¬†FT2232H¬†chip¬†with¬†high-speed¬†USB¬†2.0 ‚ÄĘBuffered¬†interface¬†works¬†with¬†3.3¬†volt¬†to¬†1.8¬†volt¬†targets ‚ÄĘReprogrammable¬†buffer¬†is¬†compatible¬†with¬†multiple¬†debugger¬†types ‚ÄĘCompatible¬†with¬†'jtagkey',¬†'KT-link'¬†programmer¬†settings¬†in¬†OpenOCD,¬†urJTAG,¬†and¬†more ‚ÄĘShips¬†with¬†JTAGkey¬†compatible¬†buffer¬†image¬†pre-programmed ‚ÄĘMini-CPLD¬†development¬†board:¬†self-programmable,¬†extra¬†CPLD¬†pins¬†to¬†header ‚ÄĘOpen¬†source¬†(CC-BY-SA) ¬† Specification: ¬†Part¬†list: USB¬†Cable;¬†Mini¬†A-1000mm-Black¬†x1 Bus¬†Blaster¬†v3¬†acrylic
Qty:
Add to Compare

Description

Bus Blaster V3c for MIPS is an economical, yet high-speed debug adapter designed for supporting JTAG debug with various MIPS processors. ¬†This version of the Bus Blaster has a 14-pin target connector and interface cable with buffering logic suitable for MIPS EJTAG targets. ¬†In other respects it is the same as the standard Bus Blaster V3c ¬† For MIPS hardware and software debugging, Bus Blaster is recommended to be used with¬†OpenOCD¬†¬†JTAG¬†programming¬†and¬†debugging¬†software¬†which can be downloaded from SourceForge. For software development, compiling, building programs, and source debugging with GDB, the Codescape MIPS SDK Essentials is a free download available from the Imagination Technologies website. Download¬†Codescape¬†SDK¬†Essentials¬†here.¬† ¬† Bus Blaster can be used with various other debugging, programming and boundary scan test software, so there are a rich variety of resources available for your MIPS development project.¬† ¬† Features: ‚ÄĘDesigned¬†for¬†MIPS¬†(EJTAG)¬†targets¬†with¬†14¬†pin¬†connector ‚ÄĘIncludes¬†100¬†cm¬†USB¬†host¬†cable ‚ÄĘIncludes¬†20¬†cm¬†target¬†cable¬†with¬†14¬†pin¬†IDC¬†connectors¬†on¬†each¬†end ‚ÄĘIncludes¬†Bus¬†Blaster¬†acrylic¬†case¬†panels¬†and¬†nylon¬†screws¬†(assembly¬†required)¬† ‚ÄĘBased¬†on¬†FT2232H¬†chip¬†with¬†high-speed¬†USB¬†2.0 ‚ÄĘBuffered¬†interface¬†works¬†with¬†3.3¬†volt¬†to¬†1.8¬†volt¬†targets ‚ÄĘReprogrammable¬†buffer¬†is¬†compatible¬†with¬†multiple¬†debugger¬†types ‚ÄĘCompatible¬†with¬†'jtagkey',¬†'KT-link'¬†programmer¬†settings¬†in¬†OpenOCD,¬†urJTAG,¬†and¬†more ‚ÄĘShips¬†with¬†JTAGkey¬†compatible¬†buffer¬†image¬†pre-programmed ‚ÄĘMini-CPLD¬†development¬†board:¬†self-programmable,¬†extra¬†CPLD¬†pins¬†to¬†header ‚ÄĘOpen¬†source¬†(CC-BY-SA) ¬† Specification: ¬†Part¬†list: USB¬†Cable;¬†Mini¬†A-1000mm-Black¬†x1 Bus¬†Blaster¬†v3¬†acrylic

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: