My Cart

SparkFun SD/MMC Card Breakout

7.5 €7.50

Availability: Retired

SPECIAL OFFER WHILE STOCKS LAST!!

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 11-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown.

This is the new Push-Push type socket. The board has 11 pins:

  • COM : Common - Connects to the housing
  • WP : Write Protect Detect Switch
  • CD : Card Detect Switch
  • P9 : Not used in SPI Mode (Pin 9 on SD Card)
  • IRQ : Not used in SPI mode (Pin 8 on SD Card)
  • DO : Serial Data Out
  • GND : Ground - Connect this to COM to ground the housing
  • CLK : Serial Clock
  • VCC : 3.3V Power
  • DI : Serial Data In
  • CS : Chip Select

It is recommended that you connect the COM pin to GND if you plan to use the CD or WP pins.

Dimensions: 1.3x1.5"

Documents:

Description

SPECIAL OFFER WHILE STOCKS LAST!!

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 11-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown.

This is the new Push-Push type socket. The board has 11 pins:

  • COM : Common - Connects to the housing
  • WP : Write Protect Detect Switch
  • CD : Card Detect Switch
  • P9 : Not used in SPI Mode (Pin 9 on SD Card)
  • IRQ : Not used in SPI mode (Pin 8 on SD Card)
  • DO : Serial Data Out
  • GND : Ground - Connect this to COM to ground the housing
  • CLK : Serial Clock
  • VCC : 3.3V Power
  • DI : Serial Data In
  • CS : Chip Select

It is recommended that you connect the COM pin to GND if you plan to use the CD or WP pins.

Dimensions: 1.3x1.5"

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: