My Cart

Bare Conductive Touch Board

88 €88.00

Availability: On Demand

Introduction: The touch board is a tool to make your projects interactive, responsive, smart or just fun. Use the Touch Board to change the world around you by turning almost any material or surface into a sensor. Paint a lightswitch on you wall, make a paper piano or create something nobody’s thought of yet. Connect anything conductive to one of its 12 electrodes and trigger a sound via its onboard MP3 player, play a MIDI note or do anything else that you might do with an Arduino or Arduino-compatible device. The Touch Board uses Atmel’s ATMega32U4 Microprocessor to make the board easy to use, flexible and widely accessible. Built in USB hardware lets the Touch Board perform a variety of functions. Features:   Touch and Distance sensing   No programming required   Arduino-compatible   Works great with Electric Paint   MP3 Player / MIDI device   Micro SD card socket   Standard 3.5mm audio jack   LiPo battery charger   HID capable Specification:   Atmel ATMega32U4 Microprocessor   Freescale MPR121 dedicated touch interface   VLSI VS 1053B audio processor   Arduino compatible   5V operating voltage (automatic voltage selector for USB or battery operation)   LiPo battery charging with boost circuit for 5V operation   16 MHz clock speed   Can be powered and programmed over USB   20 digital I/O pins   7 PWM channels   12 analog input channels   12 Touch electrodes (8 can be configured as digital inputs or outputs with PW/M capability)   84mm x 62mm foot print with maximum height of 10mm   On/Off switch when powered from battery   Touch Board Kickstarter Campion Getting Started with the Touch Board Setting up Arduino with your Touch Board Bare Conductive GitHub Proximity Code MIDI Interface Cod
Qty:
Add to Compare

Description

Introduction: The touch board is a tool to make your projects interactive, responsive, smart or just fun. Use the Touch Board to change the world around you by turning almost any material or surface into a sensor. Paint a lightswitch on you wall, make a paper piano or create something nobody’s thought of yet. Connect anything conductive to one of its 12 electrodes and trigger a sound via its onboard MP3 player, play a MIDI note or do anything else that you might do with an Arduino or Arduino-compatible device. The Touch Board uses Atmel’s ATMega32U4 Microprocessor to make the board easy to use, flexible and widely accessible. Built in USB hardware lets the Touch Board perform a variety of functions. Features:   Touch and Distance sensing   No programming required   Arduino-compatible   Works great with Electric Paint   MP3 Player / MIDI device   Micro SD card socket   Standard 3.5mm audio jack   LiPo battery charger   HID capable Specification:   Atmel ATMega32U4 Microprocessor   Freescale MPR121 dedicated touch interface   VLSI VS 1053B audio processor   Arduino compatible   5V operating voltage (automatic voltage selector for USB or battery operation)   LiPo battery charging with boost circuit for 5V operation   16 MHz clock speed   Can be powered and programmed over USB   20 digital I/O pins   7 PWM channels   12 analog input channels   12 Touch electrodes (8 can be configured as digital inputs or outputs with PW/M capability)   84mm x 62mm foot print with maximum height of 10mm   On/Off switch when powered from battery   Touch Board Kickstarter Campion Getting Started with the Touch Board Setting up Arduino with your Touch Board Bare Conductive GitHub Proximity Code MIDI Interface Cod

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: