My Cart

AutoDriver

34.95 €34.95

Availability: Retired

This AutoDriver makes it easy to put the L6470 Stepper Driver(a.k.a "dSPIN") to work in your project. Simply connect your motors and your SPI-capable microcontroller and get steppin!

STMicro's L6470 is a 3A, 8-45V bipolar stepper motor driver. It has built-in overcurrent detection, undervoltage detection, overtemperature detection, stall detection, a 5-bit ADC, and a switch input that can be used for either user jog control or as a hard stop function. As if that weren't enough, it also features microstepping support (up to 128 microsteps per full step) and PWM drive voltage limiting.

The logic supply voltage supports both 3.3V and 5V I/O levels.
Features:
  • Supports up to 128 Microsteps per Full Step
  • Over-Temperature Detect
  • Over-Current Detect
  • Under-Voltage Detect
  • PWM Drive-Voltage Limiting
  • SPI Controlled
  • On-Board Oscillator and Speed/Location Registers
  • Stall Detection
  • 5-bit ADC
Documents:

Description

This AutoDriver makes it easy to put the L6470 Stepper Driver(a.k.a "dSPIN") to work in your project. Simply connect your motors and your SPI-capable microcontroller and get steppin!

STMicro's L6470 is a 3A, 8-45V bipolar stepper motor driver. It has built-in overcurrent detection, undervoltage detection, overtemperature detection, stall detection, a 5-bit ADC, and a switch input that can be used for either user jog control or as a hard stop function. As if that weren't enough, it also features microstepping support (up to 128 microsteps per full step) and PWM drive voltage limiting.

The logic supply voltage supports both 3.3V and 5V I/O levels.
Features:
  • Supports up to 128 Microsteps per Full Step
  • Over-Temperature Detect
  • Over-Current Detect
  • Under-Voltage Detect
  • PWM Drive-Voltage Limiting
  • SPI Controlled
  • On-Board Oscillator and Speed/Location Registers
  • Stall Detection
  • 5-bit ADC
Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: