My Cart

Audio Amplifier Kit - STA540

23.65 €23.65

Availability: Retired

Description: This is a stereo amplifier kit designed to make use of the STA540 power amplifier IC. Once this kit is completed you have a fully functional, two-channel audio amplifier, complete with a standby switch, volume control and indicator LEDs. The kit also includes a 6400BG heatsink for the STA540 to dissipate any damaging heat.

In this kit, the STA540 is configured as a dual bridge amplifier capable of delivering up to 2x 38W (4 at 18V). Power supplied to the kit directly powers the STA540 and should be within 8 to 22V.

This kit comes as a bag of parts, you'll need to solder everything to the PCB. All components are through-hole, so it shouldn't be too difficult; but this kit is a bit more complex than our other through-hole kits.

Kit Includes:

  • 1x STA540 Audio Amplifier Kit PCB
  • 1x STA540 Dual/Quad Power Amplifier
  • 1x 6400BG Heatsink
  • 1x LM358 Op Amp
  • 3x LED - Basic Red
  • 1x SPDT Mini Power Switch
  • Resistors:
    • 5x 10K Ohm
    • 3x 1.0K Ohm
    • 2x 47k Ohm
    • 2x 100k Ohm
    • 2x 10k Giant Trimpot
  • Capacitors:
    • 1x 0.1uF-50V-20%
    • 1x 100uF - 25V
    • 4x 0.47uF-25V
    • 2x 10pF - 200V - 5%
    • 3x 1uF - 50V - -20,+80%
    • 1x 1000uF/25V
  • 5x 2-Pin Screw Terminal - 3.5mm
  • 4x Nylon Round Female Standoff
  • 5x Phillips Screw with 4-40 Thread
  • 1x #4-40 Hex Nut

Documents:

Description

Description: This is a stereo amplifier kit designed to make use of the STA540 power amplifier IC. Once this kit is completed you have a fully functional, two-channel audio amplifier, complete with a standby switch, volume control and indicator LEDs. The kit also includes a 6400BG heatsink for the STA540 to dissipate any damaging heat.

In this kit, the STA540 is configured as a dual bridge amplifier capable of delivering up to 2x 38W (4 at 18V). Power supplied to the kit directly powers the STA540 and should be within 8 to 22V.

This kit comes as a bag of parts, you'll need to solder everything to the PCB. All components are through-hole, so it shouldn't be too difficult; but this kit is a bit more complex than our other through-hole kits.

Kit Includes:

  • 1x STA540 Audio Amplifier Kit PCB
  • 1x STA540 Dual/Quad Power Amplifier
  • 1x 6400BG Heatsink
  • 1x LM358 Op Amp
  • 3x LED - Basic Red
  • 1x SPDT Mini Power Switch
  • Resistors:
    • 5x 10K Ohm
    • 3x 1.0K Ohm
    • 2x 47k Ohm
    • 2x 100k Ohm
    • 2x 10k Giant Trimpot
  • Capacitors:
    • 1x 0.1uF-50V-20%
    • 1x 100uF - 25V
    • 4x 0.47uF-25V
    • 2x 10pF - 200V - 5%
    • 3x 1uF - 50V - -20,+80%
    • 1x 1000uF/25V
  • 5x 2-Pin Screw Terminal - 3.5mm
  • 4x Nylon Round Female Standoff
  • 5x Phillips Screw with 4-40 Thread
  • 1x #4-40 Hex Nut

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: