My Cart

Arduino YÚN

74.95 €74.95

Availability: Retired

Arduino YÚN is the first member of a new groundbreaking line of wifi products combining the power Linux with ease of use of Arduino.   The first Arduino YÚN is the combination of a classic Arduino Leonardo (based on the Atmega32U4 processor) with a Wifi system-ona-chip running Linino (a MIPS GNU/Linux based on OpenWRT). We embedded the Linux machine directly on the PCB of the Arduino Leonardo and we connected the two so that from Arduino it’s very easy to run commands on the Linux side and use it as an Ethernet and Wifi interface.    For more details, please refer to its datasheet.   Technical Specifications AVR Arduino microcontroller Microcontroller                      ATmega32u4 Operating Voltag                  5V Input Voltage                        5V Digital I/O Pins                       20 PWM Channels                      7 Analog Input Channels      12 DC Current per I/O Pin       40 mA DC Current for 3.3V Pin    50 mA Flash Memory                     32 KB (of which 4 KB used by bootloader) SRAM                                     2.5 KB EEPROM                                 1 KB Clock Speed                          16 MHz   Linux microprocessor Processor                        AtherosAR9331 Architecture                 MIPS @400MHz Operating Voltage       3.3V Ethernet                          IEEE 802.3 10/100Mbit/s WiFi                                  IEEE 802.11b/g/n USB Type-A                    2.0 Host/Device Card Reader                 Micro-SD only RAM                                64 MB DDR2 Flash Memory               16 MB PoE compatible 802.3af card support

Description

Arduino YÚN is the first member of a new groundbreaking line of wifi products combining the power Linux with ease of use of Arduino.   The first Arduino YÚN is the combination of a classic Arduino Leonardo (based on the Atmega32U4 processor) with a Wifi system-ona-chip running Linino (a MIPS GNU/Linux based on OpenWRT). We embedded the Linux machine directly on the PCB of the Arduino Leonardo and we connected the two so that from Arduino it’s very easy to run commands on the Linux side and use it as an Ethernet and Wifi interface.    For more details, please refer to its datasheet.   Technical Specifications AVR Arduino microcontroller Microcontroller                      ATmega32u4 Operating Voltag                  5V Input Voltage                        5V Digital I/O Pins                       20 PWM Channels                      7 Analog Input Channels      12 DC Current per I/O Pin       40 mA DC Current for 3.3V Pin    50 mA Flash Memory                     32 KB (of which 4 KB used by bootloader) SRAM                                     2.5 KB EEPROM                                 1 KB Clock Speed                          16 MHz   Linux microprocessor Processor                        AtherosAR9331 Architecture                 MIPS @400MHz Operating Voltage       3.3V Ethernet                          IEEE 802.3 10/100Mbit/s WiFi                                  IEEE 802.11b/g/n USB Type-A                    2.0 Host/Device Card Reader                 Micro-SD only RAM                                64 MB DDR2 Flash Memory               16 MB PoE compatible 802.3af card support

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: