This is a DC/DC step-down voltage regulator that converts input voltage between 3.2V and 40V into a smaller voltage between 1.25V and 35V, capable of driving a 3A load with excellent line and load regulation.Ā Ā In some projects, you might need different voltages (3-35V) for your devices. Without this kind of DC power source, youāll find it time-consuming to buy a new one. The delay of project is so annoying. No worries! This module can accelerate prototyping, because you can get the voltage you need (such as 3.3V, 5V and 9V) as easy as blinking eyes. Ā Note: Input must be >1.5V higher than output. Ā Features Wide Output Voltage RangeĀ Ensured 3A Output Load Current Input Voltage Range Up to 40V Excellent Line and Load Regulation Low Power Standby Mode, Typically 80uA High Efficiency Up to 92% Precise potentiometer for voltage adjustment Thermal Shutdown and Current Limit Protection Ā Specifications Input Voltage:Ā 3.2V - 40VDC Output Voltage: 1.25V - 35VDC Max. Output Current: 3A Max. Efficiency: 92% Output Ripple: ?100mV Switching Frequency: 65KHz Operating Temperature: -45? to +85? Dimensions: 43mm*21mm*14mm(l*w*h) Ā LM2596 datasheet download Ā Ā Ā For any technical support or suggestion, please kindly go to our forum.
If you are interested in Internet of Things (IoT) or M2M projects check our open
source sensor platform Waspmote
which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.
Know more at:
Get the Starter Kits at: