My Cart

40 Pin PIC Development Board for PIC18F4550 with USB

40.75 €40.75

Availability: Retired

Description: This is simple prototype board for development of USB application with PIC18F4550 microcontroller. The power of the 18F4550 is that it has USB hardware built into it so that you can program different USB stacks directly onto the IC. Microchip provides these free USB solutions for their microcontrollers which are openly available. The USB HID Class firmware can help you to build a mouse or other Human Interface Devices for Windows, USB CDC Communication class device, USB Mass Storage firmware (add your own USB disk drives to your computer), USB-to-RS232 driver. The prototyping space allows you to easily add on sensors, relays and other peripheral devices to interface to USB. The board can take power from USB or from an external supply with small jumper selection.

Features:

  • ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debugging with PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY
  • USB 2.0 type B connector allow board to be interfaced to PC host
  • PIC18F4550-I/P is included
  • Quartz crystal 20MHz
  • LED connected to RD3 through jumper
  • User button connected to RB4
  • Reset button
  • Power jack with diode bridge can be powered with AC or DC power supply
  • 5V regulator
  • Extension slot on every uC pin
  • Grid 100 mils
  • GND bus
  • Vcc bus
  • Four mounting holes 3.3 mm (0.13")
  • FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print

Dimensions: 100x80 mm (3,9x3,15")

Documents:

Description

Description: This is simple prototype board for development of USB application with PIC18F4550 microcontroller. The power of the 18F4550 is that it has USB hardware built into it so that you can program different USB stacks directly onto the IC. Microchip provides these free USB solutions for their microcontrollers which are openly available. The USB HID Class firmware can help you to build a mouse or other Human Interface Devices for Windows, USB CDC Communication class device, USB Mass Storage firmware (add your own USB disk drives to your computer), USB-to-RS232 driver. The prototyping space allows you to easily add on sensors, relays and other peripheral devices to interface to USB. The board can take power from USB or from an external supply with small jumper selection.

Features:

  • ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debugging with PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY
  • USB 2.0 type B connector allow board to be interfaced to PC host
  • PIC18F4550-I/P is included
  • Quartz crystal 20MHz
  • LED connected to RD3 through jumper
  • User button connected to RB4
  • Reset button
  • Power jack with diode bridge can be powered with AC or DC power supply
  • 5V regulator
  • Extension slot on every uC pin
  • Grid 100 mils
  • GND bus
  • Vcc bus
  • Four mounting holes 3.3 mm (0.13")
  • FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print

Dimensions: 100x80 mm (3,9x3,15")

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: