My Cart

4-Soldering Zoo Kit

16.9 €16.90

Availability: Retired

    This DIY soldering kit contains everything you need to create simple circuits with minimum skill required for electronics and soldering. Kids will be introduced to basics of circuit, soldering and take the opportunity to play with LEDs, battery and bring these animals to life!   It’s simple and funny. Pick the panda of inside six animals and solder a LED and battery box on the back. It then starts blinking immediately. You can place them in your paper zoo or pin them anywhere you like. You can also decorate them with cute accessories so they look perfectly unique!   There are 6 fantastic funny and cute animals to be taken care of.  Llama Panda Lion Bunny Sheep Giraffe *Soldering iron is not included.     It is suitable for creating at home, in the classroom or during spare time.       List of the Kit 6 × Pre-cut Animal PCBs 6 × LEDs 6 × Battery Insulation Pull Tabs 6 × CR1220 3V Coin Batteries 6 × Battery Holders 6 × Double Sided Sticky Tapes     Features Customizable animal characters and scenes Soft light RGB LED with nice transitions RoHs-free, soft edge PCB with immersion-gold, environment-friendly Battery life up to 48 hours Assemble Time: 2 hours Ages 6 and up   Support If you have any further question for technical support, please contact [email protected] or visit forum of DFRobot.

Description

    This DIY soldering kit contains everything you need to create simple circuits with minimum skill required for electronics and soldering. Kids will be introduced to basics of circuit, soldering and take the opportunity to play with LEDs, battery and bring these animals to life!   It’s simple and funny. Pick the panda of inside six animals and solder a LED and battery box on the back. It then starts blinking immediately. You can place them in your paper zoo or pin them anywhere you like. You can also decorate them with cute accessories so they look perfectly unique!   There are 6 fantastic funny and cute animals to be taken care of.  Llama Panda Lion Bunny Sheep Giraffe *Soldering iron is not included.     It is suitable for creating at home, in the classroom or during spare time.       List of the Kit 6 × Pre-cut Animal PCBs 6 × LEDs 6 × Battery Insulation Pull Tabs 6 × CR1220 3V Coin Batteries 6 × Battery Holders 6 × Double Sided Sticky Tapes     Features Customizable animal characters and scenes Soft light RGB LED with nice transitions RoHs-free, soft edge PCB with immersion-gold, environment-friendly Battery life up to 48 hours Assemble Time: 2 hours Ages 6 and up   Support If you have any further question for technical support, please contact [email protected] or visit forum of DFRobot.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: