My Cart

3A, 12-28V Brushed DC Motor Controller (Uptech BDMC2803)

172 €172.00

Availability: Retired

Introduction

The Uptech BDMC2803 3A, 12-28V Brushed DC Motor Controller is based on a powerful 16-bit DSP with excellent filtering quality. This intelligent motor controller integrated a controller and a PWM amplifier into one case. It features the RS232 interface for connection to PC or control with transfer rates of up to 115K Baud. An extensive set of ASCII commands is available for programming and operation. The UP-TECH Motion Terminal 1.0 software is available for Windows 2K/XP: This considerably simplifies operation and configuration of the units and also offers a graphic online analysis function for operating data. The drive can also be operated independently of the RS232 interface if the desired function, such as velocity or position controller, has been previously programmed via analog input, stepper motor, etc.

Specification

  • Instruction and interface compatible with FAULHABER MCDC series motor controller
  • Up to 80KHz PWM (for low load inductance)
  • Closed loop/Open loop
  • Torque control
  • Velocity control: +/- 10V, PWM, PPM (Hobby RC), RS232
  • Position Control: RS232, Pluse/Dir
  • Velocity Profiles: Ramping, triangle, trapezoidal and more complicated combined velocity profiles are available to the user
  • Storage of the set configurations

Documents

Description

Introduction

The Uptech BDMC2803 3A, 12-28V Brushed DC Motor Controller is based on a powerful 16-bit DSP with excellent filtering quality. This intelligent motor controller integrated a controller and a PWM amplifier into one case. It features the RS232 interface for connection to PC or control with transfer rates of up to 115K Baud. An extensive set of ASCII commands is available for programming and operation. The UP-TECH Motion Terminal 1.0 software is available for Windows 2K/XP: This considerably simplifies operation and configuration of the units and also offers a graphic online analysis function for operating data. The drive can also be operated independently of the RS232 interface if the desired function, such as velocity or position controller, has been previously programmed via analog input, stepper motor, etc.

Specification

  • Instruction and interface compatible with FAULHABER MCDC series motor controller
  • Up to 80KHz PWM (for low load inductance)
  • Closed loop/Open loop
  • Torque control
  • Velocity control: +/- 10V, PWM, PPM (Hobby RC), RS232
  • Position Control: RS232, Pluse/Dir
  • Velocity Profiles: Ramping, triangle, trapezoidal and more complicated combined velocity profiles are available to the user
  • Storage of the set configurations

Documents

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: