My Cart

24Mhz 8 Channel Logic analyzer (Saleae Logic Compatible)

52.5 €52.50

Availability: On Demand

Introduction

This is a very affordable 24Mhz 8 Channel USB Logic analyzer. This is a hobbyist level analyzer, ideal for testing your Arduino or other hobbyist microcontroller's communications. A logic analyzer is a must have tool for any serious electronics hobbyist. With a logic analyzer it is possible to see a visual representation of the zeros and ones that are flashing by between two components. A logic analyzer is different from an oscilloscope because the analyzer allows you to capture the data on a PC for a more detailed analysis of the data which is being transmitted and received. This logic analyzer supports 10 different communications standards (see Specifications below). with 8 channels it will allow you to monitor upto 8 differnet wires. So on an Arduino you could monitor the Serial port (tx/Rx pins), the I2C port (pins A4, A5), and the SPI port (pins 10, 11, 12, and 13) all at the same time.
Specifications
  • 8 Channels
  • Supports triggering (rising, high, falling, low)
  • Up to 24Mhz sampling
  • Up to 10 Billion samples
  • Max Voltage: 5.25Vdc
  • supports:
    • CAN
    • DMX-512
    • I2C
    • I2S/PCM
    • Manchester
    • 1-Wire
    • Async Serial
    • Simple Parallel
    • SPI
    • UNI/O
    • Fully compatible with the Saleae Logic software
Shipping List
  • Logic Analyzer (1 unit)
  • Mini USB Cable (1 unit)
  • Jumper wire (10 units)

Documents
Qty:
Add to Compare

Description

Introduction

This is a very affordable 24Mhz 8 Channel USB Logic analyzer. This is a hobbyist level analyzer, ideal for testing your Arduino or other hobbyist microcontroller's communications. A logic analyzer is a must have tool for any serious electronics hobbyist. With a logic analyzer it is possible to see a visual representation of the zeros and ones that are flashing by between two components. A logic analyzer is different from an oscilloscope because the analyzer allows you to capture the data on a PC for a more detailed analysis of the data which is being transmitted and received. This logic analyzer supports 10 different communications standards (see Specifications below). with 8 channels it will allow you to monitor upto 8 differnet wires. So on an Arduino you could monitor the Serial port (tx/Rx pins), the I2C port (pins A4, A5), and the SPI port (pins 10, 11, 12, and 13) all at the same time.
Specifications
  • 8 Channels
  • Supports triggering (rising, high, falling, low)
  • Up to 24Mhz sampling
  • Up to 10 Billion samples
  • Max Voltage: 5.25Vdc
  • supports:
    • CAN
    • DMX-512
    • I2C
    • I2S/PCM
    • Manchester
    • 1-Wire
    • Async Serial
    • Simple Parallel
    • SPI
    • UNI/O
    • Fully compatible with the Saleae Logic software
Shipping List
  • Logic Analyzer (1 unit)
  • Mini USB Cable (1 unit)
  • Jumper wire (10 units)

Documents

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: