My Cart

2.4GHz Antenna - Adhesive (U.FL connector)

5 €5.00

Availability: Retired

Description: This adhesive, omni-directional antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating on the 2.4GHz band, it works great for WiFi, Bluetooth or ZigBee. Just connect the antenna using the attached u.fl connector and then peel and stick!

Dimensions: 41 x 30mm, 350mm cable

Features:

  • Type: Omni-Directional
  • Min Frequency: 2300|5150 MHz
  • Max Fequency: 3800|5875 MHz
  • Impedance: 50 Ohm
  • Maximum VSWR: 3
  • Typical Gain: 2(Max) dB

Documents:

Description

Description: This adhesive, omni-directional antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating on the 2.4GHz band, it works great for WiFi, Bluetooth or ZigBee. Just connect the antenna using the attached u.fl connector and then peel and stick!

Dimensions: 41 x 30mm, 350mm cable

Features:

  • Type: Omni-Directional
  • Min Frequency: 2300|5150 MHz
  • Max Fequency: 3800|5875 MHz
  • Impedance: 50 Ohm
  • Maximum VSWR: 3
  • Typical Gain: 2(Max) dB

Documents:

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: