My Cart

12V DC Motor 251rpm w/Encoder

38 €38.00

Availability: Retired

Introduction

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.7:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 2797 counts per revolution of the gearboxs output shaft.
These units have a 0.61" long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart.
This motor is an ideal option for your mobile robot project.
Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8") into the screw hole.
Specifications
  • Gear ratio: 43.7:1
  • Free-run speed @ 12V: 251 rpm
  • Free-run current @ 12V: 0.4A
  • Rated torque @ 12V: 1.5 kg*cm
  • Encoder Resolution: 64CPR(motor shaft)/2797CPR(gearbox shaft)
  • Weight: 205g
Shipping list
  • GB37Y3530-12V-251R Gear Motor w/Encoder x1
Documents

Description

Introduction

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.7:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 2797 counts per revolution of the gearboxs output shaft.
These units have a 0.61" long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart.
This motor is an ideal option for your mobile robot project.
Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8") into the screw hole.
Specifications
  • Gear ratio: 43.7:1
  • Free-run speed @ 12V: 251 rpm
  • Free-run current @ 12V: 0.4A
  • Rated torque @ 12V: 1.5 kg*cm
  • Encoder Resolution: 64CPR(motor shaft)/2797CPR(gearbox shaft)
  • Weight: 205g
Shipping list
  • GB37Y3530-12V-251R Gear Motor w/Encoder x1
Documents

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: