My Cart

100MHz Digital Storage Oscilloscope - GA1102CAL

399.95 €399.95

Availability: Retired

An oscilloscope can be a very handy instrument to keep on your workbench and this GA1102CAL digital storage oscilloscope will help you take your circuit analysis and troubleshooting to the next level. This 2-channel, 100MHz digital scope has a 1G Sa/s real-time sampling rate and comes with everything you need to get up and running. Each of the two included probes features an attenuation switch which will limit the bandwidth to 10MHz. USB-host functionality allows the scope to save waveforms to any USB flashdrive and USB-device functionality (accessible via the USB-A port on the back) allows the scope to communicate with the included software so you can import waveforms and data to the computer as well as software-control the scope. The scope also supports PictBridge compatible printers. The 7" color TFT display and on-screen menu system make it easy to access all of the features of the scope.Note: The cover of the user manual below is incorrect, it should say “GA1000 Series” instead of “ADS1000 Series.” We assure you that the user manual listed is correct.Features: 2-Channel, 100MHz7" LCD Screen1G Sa/s Real-time Sampling Rate50GSa/s Equivalent Sampling Rate40K/CH Memory DepthEdge, Pulse, Video, Slope, Alternative, and Delay Trigger FunctionsDigital Filter and Waveform Recorder FunctionsPass/Fail FunctionSave and Recall Setup/Waveform/CSV data on USB FlashdriveSave or Print Waveform Image CapturesOn-Screen Menu SystemRS-232 ConnectorPC Remote-Control with Included SoftwareInput Voltage - 100-240VACIncludes:1x GA1102CAL Oscilloscope2 x 1:1/10:1 ProbesPower CableUSB CableEasyScope3.0 Software CDUser ManualDocuments:GA1000 Series User ManualPC Software User GuideHow to Use an Oscilloscope

Description

An oscilloscope can be a very handy instrument to keep on your workbench and this GA1102CAL digital storage oscilloscope will help you take your circuit analysis and troubleshooting to the next level. This 2-channel, 100MHz digital scope has a 1G Sa/s real-time sampling rate and comes with everything you need to get up and running. Each of the two included probes features an attenuation switch which will limit the bandwidth to 10MHz. USB-host functionality allows the scope to save waveforms to any USB flashdrive and USB-device functionality (accessible via the USB-A port on the back) allows the scope to communicate with the included software so you can import waveforms and data to the computer as well as software-control the scope. The scope also supports PictBridge compatible printers. The 7" color TFT display and on-screen menu system make it easy to access all of the features of the scope.Note: The cover of the user manual below is incorrect, it should say “GA1000 Series” instead of “ADS1000 Series.” We assure you that the user manual listed is correct.Features: 2-Channel, 100MHz7" LCD Screen1G Sa/s Real-time Sampling Rate50GSa/s Equivalent Sampling Rate40K/CH Memory DepthEdge, Pulse, Video, Slope, Alternative, and Delay Trigger FunctionsDigital Filter and Waveform Recorder FunctionsPass/Fail FunctionSave and Recall Setup/Waveform/CSV data on USB FlashdriveSave or Print Waveform Image CapturesOn-Screen Menu SystemRS-232 ConnectorPC Remote-Control with Included SoftwareInput Voltage - 100-240VACIncludes:1x GA1102CAL Oscilloscope2 x 1:1/10:1 ProbesPower CableUSB CableEasyScope3.0 Software CDUser ManualDocuments:GA1000 Series User ManualPC Software User GuideHow to Use an Oscilloscope

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: