My Cart

0.5 inch OLED display Arduino shield

15 €15.00

Availability: Retired

OCELL is a 0.5 inch OLED module designed as a  Arduino shield and also available for other  micro controllers . It is the smallest Arduino display module you can find so far. You could connect it to Ardunio micro directly without doing any PCB layout and also available for other controllers . It is a good choice for a DIYer to make a project which need a tiny COOL OLED display. Features:  1. The smallest size in all Arduino display modules so far. 2. Very high contrast and brightness. 3. Very low power consumption 4. No backlight required 5. Supported by U8glib library High light : These OLED displays are small, only about 0.5" diameter, but very readable due to the high contrast (450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast and very low power consumption.   Specification? PCB dimensions: 17.8mm X 15.5mm Screen size: 0.5 (inch) W. H: 15.30x10.20 mm Color: Monochrome (white) OLED  type: PM -OLED OLED driver: LD7032 Pixels : 60 x 32 Contrast: 2000: 1 Communication: SPI, I2C Notice: 1 pc OCELL includes: 1x module PCB , 1x OLED display , 1x10 pins header Does not include: Arduino    U8glib Library download: Library U8lib libary WIKI:  https://code.google.com/p/u8glib/wiki/gallery OCELL User Guide? uesr guide                                        0.5 OLED  SPEC                                       Device Spec For any technical support or suggestion, please kindly go to our forum.

Description

OCELL is a 0.5 inch OLED module designed as a  Arduino shield and also available for other  micro controllers . It is the smallest Arduino display module you can find so far. You could connect it to Ardunio micro directly without doing any PCB layout and also available for other controllers . It is a good choice for a DIYer to make a project which need a tiny COOL OLED display. Features:  1. The smallest size in all Arduino display modules so far. 2. Very high contrast and brightness. 3. Very low power consumption 4. No backlight required 5. Supported by U8glib library High light : These OLED displays are small, only about 0.5" diameter, but very readable due to the high contrast (450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast and very low power consumption.   Specification? PCB dimensions: 17.8mm X 15.5mm Screen size: 0.5 (inch) W. H: 15.30x10.20 mm Color: Monochrome (white) OLED  type: PM -OLED OLED driver: LD7032 Pixels : 60 x 32 Contrast: 2000: 1 Communication: SPI, I2C Notice: 1 pc OCELL includes: 1x module PCB , 1x OLED display , 1x10 pins header Does not include: Arduino    U8glib Library download: Library U8lib libary WIKI:  https://code.google.com/p/u8glib/wiki/gallery OCELL User Guide? uesr guide                                        0.5 OLED  SPEC                                       Device Spec For any technical support or suggestion, please kindly go to our forum.

If you are interested in Internet of Things (IoT) or M2M projects check our open source sensor platform Waspmote which counts with more than 100 sensors available to use 'off the shelf', a complete API with hundreds of ready to use codes and a low consumption mode of just 0.7µA to ensure years of battery life.

Know more at:

Get the Starter Kits at: