Details
XBee ZB embedded RF modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. SMA-RP Version.
Performance
| RF Data Rate | 250 Kbps | ||
| Indoor/Urban Range | 133 ft (40 m) | ||
| Outdoor/RF Line-of-Sight Range |
400 ft (120 m) | ||
| Transmit Power | 1.25 mW (+1 dBm) / 2 mW (+3 dBm) boost mode | ||
| Receiver Sensitivity (1% PER) | -96 dBm in boost mode | ||
Features
| Adjustable Power | Yes | ||
| I/O Interface | 3.3V CMOS UART, ADC, DIO | ||
| Configuration Method | API or AT commands, local or over-the-air | ||
| Frequency Band | 2.4 GHz | ||
| Interference Immunity | DSSS (Direct Sequence Spread Spectrum) | ||
| Serial Data Rate | 1200 bps - 1 Mbps | ||
| ADC Inputs | (4) 10-bit ADC inputs | ||
| Digital I/O | 10 | ||
| Antenna Options | Chip, Wire Whip, U.FL, RPSMA | ||
| Operating Temperature & Humidity |
-40° C to +85° C, 0-95% humidity non-condensing | ||
|
Programmability |
|
| Networking & Security | |
| Encryption | 128-bit AES |
| Reliable Packet Delivery | Retries/Acknowledgments |
| IDs and Channels | PAN ID, 64-bit IEEE MAC, 16 channels |
|
Power Requirements |
|
| Supply Voltage | 2.1 - 3.6VDC |
| Transmit Current | 35 mA / 45 mA boost mode @ 3.3VDC |
| Receive Current | 38 mA / 40 mA boost mode @ 3.3VDC |
| Power-Down Current | <1 uA @ 25º C |
|
Regulatory Approvals |
|
| FCC (USA) | Yes |
| IC (Canada) | Yes |
| ETSI (Europe) | Yes |
| C-TICK (Australia) | Yes |
| TELEC (Japan) | Yes |
Note: If you are searching for Wireless Sensor Networks devices (motes) you may be interested in our ready to market sensor platform: Waspmote. You can discover the differences between both platforms in the document: Waspmote vs SquidBee.
Additional Information
| RoHS | Yes |
|---|
Related Products
Check items to add to the cart or select all
Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Community Poll
Newsletter
