libelium
  • rss
  • flickr
  • instagram
  • twitter
  • facebook
  • youtube

Resultados de la búsqueda para 'shield'

160 Artículo(s)

por página

Cuadricula  Lista 

Configurar sentido descendente
  1. Internal Speaker for 3G Shield (GSM/GPRS/3G/GPS)

    Internal Speaker for 3G Shield (GSM/GPRS/3G/GPS)

    Excl. Tax: € 2,00 Incl. Tax: € 2,42

    Passive 2 channels Internal Speaker for 3G/GPRS shield for Arduino (3G + GPS). Make your own phone with Arduino!!

    Saber más
  2. Raspberry Pi to Arduino Shields Connection Bridge

    Raspberry Pi to Arduino Shields Connection Bridge

    Excl. Tax: € 40,00 Incl. Tax: € 48,40

    The idea behind the Raspberry Pi to Arduino shields connection bridge is to allow to use any of the shields, boards and modules designed for Arduino in Raspberry Pi. It includes also the possibility of connecting digital and analog sensors, using the same pinout of Arduino but with the power and capabilities of Raspberry.

    In order to make complete the compatibility we have created the arduPi library which allows to use Raspberry with the same code used in Arduino. To do so, we have implemented conversion functions so that you can control in the same way as in Arduino all the I/O interfaces: i2C, SPI, UART, analog, digital, in Raspberry Pi.

    The Raspberry Pi to Arduino Shields Connection Bridge is compatible with both Raspberry Pi and the new Raspberry Pi (Model B+). Read more.

    Documentation:
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi to get it.

    Saber más
  3. GPRS+GPS Quadband Shield for Raspberry Pi (SIM908)

    GPRS+GPS Quadband Shield for Raspberry Pi (SIM908)

    Excl. Tax: € 139,00 Incl. Tax: € 168,19

    The new shield designed for Arduino and Raspberry Pi integrates the SIM908 module which counts with both GPRS and GPS technologies what allows to easily perform realtime tracking applications. The idea is simple: read the GPS coordinates (longitude and latitude) and send them by using a HTTP request to a web server. Then use a browser to load the PHP webpage which uses Googlemaps to show the location in realtime. Antennas not included.

    This kit includes:
    GPRS+GPS Quadband Module for Arduino/Raspberry Pi (SIM908)
    Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    Tutorial
    Schematic
    AT Commands
    SIM908 Module Info

    NOTE: If you are looking for a complete 3G+GPS Solution, don't hesitate to visit our 3G Platform for Arduino/Raspberry Pi. If you prefer only a GPRS communication, you can use our GPRS SIM900 Module for Arduino/Raspberry Pi.

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  4. 3G/GPRS shield for Arduino, Raspberry Pi and Intel Galileo (3G + GPS) + Audio/Video Kit

    3G/GPRS shield for Arduino, Raspberry Pi and Intel Galileo (3G + GPS) + Audio/Video Kit

    Precio habitual: € 217,80

    Precio especial: Excl. Tax: € 162,00 Incl. Tax: € 196,02

    New Camera! Now 2MP (1600 x 1200) - UXGA resolution

    NOTE: This product is compatible with Arduino, Raspberry Pi and Intel Galileo boards. See below the links to each of the tutorials.

    The new 3G shield for Arduino enables the connectivity to high speed WCDMA and HSPA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new "Internet of Things" era.

    The module counts also with an internal GPS what enables the location of the device outdoors and indoors combining standard NMEA frames with mobile cell ID triangulation using both assisted-mobile (A-GPS) and mobile-based (S-GPS) modes. Antennas not included.

    You will need to update your firmware to play mp3. The update is available here. Uncompress and run it in a PC with Windows (emulated Windows not supported).

    Antennas not included.

    This kit include:
    - 3G/GPRS Shield for Arduino, Raspberry Pi and Intel Galileo
    - External Speaker
    - Internal Speaker
    - Microphone
    - New Video Camera 2MP (1600 x 1200) - UXGA
    - Hands Free Headset Headphones

    Features:
    - WCDMA and HSPA 3G networks compatibility
    - Internal GPS for Assisted A-GPS and Supported S-GPS modes
    - New Video Camera 2MP (1600 x 1200) - UXGA resolution
    - Audio Kit including microphone, speaker, hands free and headphones available
    - SD file system up to 32GB
    - Works as a standard 3G modem in Linux/Windows/MacOS (~7.2Mbps download, ~5.5Mbps upload)
    - Talk directly to web servers by HTTP/HTTPS (secure)
    - Upload and download files directly by FTP/FTPS (secure)
    - Send and receive mails by POP3/SMTP
    - Play compressed audio files

    Download the Fritzing library to include in your electronic designs here

    Documentation:
    Tutorial Arduino: 3G+GPS
    Tutorial Raspberry Pi: 3G+GPS
    Tutorial Intel Galileo: 3G+GPS
    - Video-Tutorial
    - SIM5218 AT command manual
    - 3G shield schematic

    NOTE: The Arduino/Raspberry Pi jumper MUST be in Arduino position. The Raspberry Pi position should be used only if the shield is connected to a Raspberry Pi. A wrong position of this jumper can damage the 3G shield.

    NOTE: If you are looking for a complete GPRS+GPS Solution, don't hesitate to visit our GPRS+GPS Quadband Module for Arduino/Raspberry Pi (SIM908).

    NOTE: If you only need to send SMS or use a low bandwidth for data transfer you can use our cheaper GPRS/GSM Quadband SIM900 module for Arduino.

    Saber más
  5. Handsfree headset headphones for 3G/GPS shield for Arduino

    Handsfree headset headphones for 3G/GPS shield for Arduino

    Excl. Tax: € 5,00 Incl. Tax: € 6,05

    Headset 3.5mm black earphone with mic. The best complement to our 3G/GPRS shield for Arduino (3G + GPS) to make video-calls with Arduino.

    Saber más
  6. Bluetooth PRO shield for Raspberry Pi

    Bluetooth PRO shield for Raspberry Pi

    Excl. Tax: € 115,00 Incl. Tax: € 139,15

    Featured in:  Postscapes

    The Bluetooth PRO shield for Raspberry Pi has been mainly designed to discover high amount of bluetooth devices along with its RSSI and Class of Device (CoD).


    This kit includes:
    - Bluetooth module PRO for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for Bluetooth PRO shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  7. 3G / GPRS shield for Raspberry Pi (3G+GPS)

    3G / GPRS shield for Raspberry Pi (3G+GPS)

    Excl. Tax: € 189,00 Incl. Tax: € 228,69

    New Camera! Now 2MP (1600 x 1200) - UXGA resolution
    [Available in the 3G Audio / Video Kit]

    This 3G shield for Raspberry enables the connectivity to high speed WCDMA and HSPA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new "Internet of Things" era using your Raspberry Pi. Antennas not included.


    This kit includes:
    - 3G/GPRS Shield for Arduino / Raspberry Pi (3G+GPS)
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for 3G/GPRS Shield for Raspberry Pi (3G+GPS)
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    NOTE: If you are looking for a complete GPRS+GPS Solution, don't hesitate to visit our GPRS+GPS Quadband Module for Arduino/Raspberry Pi (SIM908).

    NOTE: If you only need to send SMS or use a low bandwidth for data transfer you can use our cheaper GPRS/GSM Quadband SIM900 module for Arduino.

    Saber más
  8. GPRS SIM900 shield for Raspberry Pi

    GPRS SIM900 shield for Raspberry Pi

    Excl. Tax: € 103,00 Incl. Tax: € 124,63

    Featured in:  Postscapes

    GPRS SIM900 shield for Raspberry Pi offers GPRS connection to your Raspberry Pi board. It includes the SIM900 communication module from SIMCom. It is necessary an antenna in order to establish a communication.


    This kit includes:
    - GPRS/GSM (SIM900) Quadband Module for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for GPRS SIM900 shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    NOTE: If you are looking for a complete 3G+GPS Solution, don't hesitate to visit our 3G Platform for Arduino/Raspberry Pi. If you prefer a GPRS+GPS communication, you can use our GPRS+GPS Quadband Shield for Raspberry Pi (SIM908).

    Saber más
  9. 4-20 mA (Current Loop) Sensor Shield for Raspberry Pi

    4-20 mA (Current Loop) Sensor Shield for Raspberry Pi

    Excl. Tax: € 86,00 Incl. Tax: € 104,06

    The 4-20 mA Current Loop Board is one of the most robust sensor signaling standard. Current loops are ideal for data transmission because of their inherent insensitivity to electrical noise. In a 4-20 mA current loop, all the signaling current flows through all components; the same current flows even if the wire terminations are less than perfect. All the components in the loop drop voltage due to the signaling current flowing through them. The signaling current is not affected by these voltage drops as long as the power supply voltage is greater than the sum of the voltage drops around the loop at the maximum signaling current of 20 mA.

    Transmitting sensor information via a current loop is particularly useful when the information has to be sent to a remote location over long distances (500 meters, or more). The loop operation is straightforward: a sensor output voltage is first converted to a proportional current, with 4 mA normally representing the sensor zero-level output, and 20 mA representing the sensor full-scale output. Then, a receiver at the remote end converts the 4-20 mA current back into a voltage which in turn can be further processed by a computer or display module.

    This kit includes:
    - 4-20 mA (Current Loop) Sensor Board for Arduino, Raspberry Pi and Intel Galileo
    - Raspberry Pi to Arduino Shields Connection Bridge

    4-20 mA Current Loop
    Type Analog
    Media Twisted pair
    No. of channels 4
    Distance 900 m
    Supply 5-24V

    Documentation:
    Tutorial

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  10. Radiation shield for Raspberry Pi

    Radiation shield for Raspberry Pi

    Excl. Tax: € 119,00 Incl. Tax: € 143,99

    Radiation shield for Raspberry Pi can detect Alpha, Beta and Gamma radiation, integrating any Geiger Tube which works in the range 400V - 1000V and reading these levels using Raspberry Pi. This version comes without the Geiger tube. A version with a Geiger tube already soldered is available here.


    This kit includes:
    - Pack Radiation Sensor Board for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for Radiation shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  11. RFID 13,56 Mhz shield for Raspberry Pi

    RFID 13,56 Mhz shield for Raspberry Pi

    Excl. Tax: € 90,00 Incl. Tax: € 108,90

    RFID 13.56 MHz shield for Raspberry Pi is used with the Raspberry Pi to Arduino Shield Connection Bridge to communicate it through the serial port.

    This kit includes:
    - RFID 13.56 MHz Module for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for RFID 13.56 MHz shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  12. Radiation shield for Raspberry Pi + Geiger Tube

    Radiation shield for Raspberry Pi + Geiger Tube

    Excl. Tax: € 159,00 Incl. Tax: € 192,39

    Radiation shield for Raspberry Pi + Geiger Tube can detect Alpha, Beta and Gamma radiation, integrating any Geiger Tube which works in the range 400V - 1000V and reading these levels using Raspberry Pi. The current version of the pack comes with the J305ß Geiger tube which detectes Beta and Gamma radiation.


    This kit includes:
    - Pack Radiation Sensor Board for Arduino / Raspberry Pi + Geiger Tube
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for Radiation shield for Raspberry Pi + Geiger Tube
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  13. Open Garden Shield for Arduino

    Open Garden Shield for Arduino

    Precio habitual: € 72,60

    Precio especial: Excl. Tax: € 54,00 Incl. Tax: € 65,34

    Open Garden is an Open Source alternative to commercial home automation to remotely control your indoor and outdoor plants. The platform consist of three different kits, each ready for a specific kind of growing plant scenario: indoor (houses and greenhouses), outdoor (gardens and fields) and hydroponics (plants in water installations).

    The platform allows to control the state of the plants by sensing several parameters:

    • Soil moisture (Indoor & Outdoor kits)
    • Temperature + Humidity + Light (All kits)
    • Water sensorspHConductivityTemperature(Hydroponics kit)

    Then it uses different types of actuators to modify the state of the plants by irrigating them or activating lights and oxygen pumps:

    • Water pump + Droppers for Drip Irrigation (Indoor kit)
    • Electro valve + Sprinkler for Sprinkling (Outdoor kit)
    • Oxygen Pump + Growing Light (Hydroponics kit)

    The nodes send periodically the information to the Gateway that uploads the data to a web server by using any of the available wireless interfaces (WiFiGPRS3G). 

    Documentation:
    Tutorial: Open Garden - Hydroponics & Garden Plants Monitoring for Arduino

    - Access to the complete list of kits and accessories of Open Garden here.

    Related Products

    Saber más
  14. 3G/GPRS shield for Arduino, Raspberry Pi and Intel Galileo (3G + GPS)

    3G/GPRS shield for Arduino, Raspberry Pi and Intel Galileo (3G + GPS)

    Precio habitual: € 180,29

    Precio especial: Excl. Tax: € 134,10 Incl. Tax: € 162,26

    New Camera! Now 2MP (1600 x 1200) - UXGA resolution
    [Available in the 3G Audio / Video Kit]

    NOTE: This product is compatible with Arduino, Raspberry Pi and Intel Galileo boards. See below the links to each of the tutorials.

    The new 3G shield for Arduino enables the connectivity to high speed WCDMA and HSPA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new "Internet of Things" era.

    The module counts also with an internal GPS what enables the location of the device outdoors and indoors combining standard NMEA frames with mobile cell ID triangulation using both assisted-mobile (A-GPS) and mobile-based (S-GPS) modes.

    You can also find our Audio/Video Kit to complete this 3G/GPRS Shield. Antennas not included.

    You will need to update your firmware to play mp3. The update is available here. Uncompress and run it in a PC with Windows (emulated Windows not supported).

    Features: - WCDMA and HSPA 3G networks compatibility
    - Internal GPS for Assisted A-GPS and Supported S-GPS modes
    - New Video Camera 2MP (1600 x 1200) - UXGA resolution -> Available in the Audio / Video Kit
    - Audio Kit including microphone, speaker, hands free and headphones available
    - SD file system up to 32GB
    - Works as a standard 3G modem in Linux/Windows/MacOS (~7.2Mbps download, ~5.5Mbps upload)
    - Talk directly to web servers by HTTP/HTTPS (secure)
    - Upload and download files directly by FTP/FTPS (secure)
    - Send and receive mails by POP3/SMTP
    - Play compressed audio files

    Download the Fritzing library to include in your electronic designs here

    Documentation:
    Tutorial Arduino: 3G+GPS
    Tutorial Raspberry Pi: 3G+GPS
    Tutorial Intel Galileo: 3G+GPS
    - Video-Tutorial
    - SIM5218 AT command manual
    - 3G shield schematic

    NOTE: The Arduino/Raspberry Pi jumper MUST be in Arduino position. The Raspberry Pi position should be used only if the shield is connected to a Raspberry Pi. A wrong position of this jumper can damage the 3G shield.

    NOTE: If you are looking for a complete GPRS+GPS Solution, don't hesitate to visit our GPRS+GPS Quadband Module for Arduino/Raspberry Pi (SIM908).

    NOTE: If you only need to send SMS or use a low bandwidth for data transfer you can use our cheaper GPRS/GSM Quadband SIM900 module for Arduino.

    Saber más
  15. RFID 125 kHz shield for Raspberry Pi

    RFID 125 kHz shield for Raspberry Pi

    Excl. Tax: € 74,00 Incl. Tax: € 89,54

    RFID 125 kHz shield for Raspberry Pi is used with the Raspberry Pi to Arduino Shield Connection Bridge to communicate it through the serial port.


    This kit includes:
    - RFID 125 kHz Module for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for RFID 125 kHz shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  16. Bluetooth shield for Raspberry Pi

    Bluetooth shield for Raspberry Pi

    Excl. Tax: € 86,00 Incl. Tax: € 104,06

    Featured in:  Postscapes

    Bluetooth shield for Raspberry Pi allows to get a serial communication between your Raspberry Pi and other devices through Bluetooth protocol.


    This kit includes:
    - Bluetooth Module for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for Bluetooth shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  17. RS-232 Serial / Modbus Shield for Raspberry Pi

    RS-232 Serial / Modbus Shield for Raspberry Pi

    Excl. Tax: € 57,00 Incl. Tax: € 68,97

    The RS-232 standard was first introduced in 1962 by the Radio Sector of the EIA. The original DTEs (data terminal equipment) were electromechanical teletypewriters, and the original DCEs (data circuit-terminating equipment) were usually modems. For many years, an RS-232-compatible port was a standard feature for serial communications, such as modem connections, on many computers. The RS-232 standard is still used to connect industrial equipment (such as PLCs), console ports and special purpose equipment.

    The IEEE RS-232 standard defines electrical, signal timing, and size connectors. Use of a common ground, limits RS-232 to applications with relatively short cables. RS-232 connection consisting only of transmit data, receive data, and ground. RS-232 protocol uses bipolar signal. Valid signals are ±3 to +15 volts, the ±3V range is not a valid RS-232 level. Data signals between -3V and -15V represents a logic 1. The logic 0 is represented by a voltage of between +3V and +15V.

    This kit includes:
    - RS-232 Serial / Modbus Module for Arduino, Raspberry Pi and Intel Galileo
    - Raspberry Pi to Arduino Shields Connection Bridge

    RS-232
    Standard TIA-232-F
    Cabling Single ended
    Connector DB9
    Network Topology Point-to-point
    Maximum Speed 115200 bps
    Signaling Unbalanced
    Mark(1) -5...-15
    Space(0) +5...+15
    Signals Full Duplex (Rx, TX)

    Documentation:
    Tutorial

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  18. RS-485 / Modbus Shield for Raspberry Pi

    RS-485 / Modbus Shield for Raspberry Pi

    Excl. Tax: € 75,00 Incl. Tax: € 90,75

    RS-485 is the most versatile communication standard. The RS-485 standard defines the electrical characteristics of drivers and receivers for use in digital systems. The standard is published by the Telecommunications Industry Association/Electronic Industries Alliance (TIA/EIA). RS-485 signals are used in a wide range of computer and automation systems and are used in programmable logic controllers and on factory floors. Since it is differential, it resists electromagnetic interference from motors and welding equipment. It may be used to control video surveillance systems or to interconnect security control panels and devices such as access control card readers. It does not specify or recommend any communications protocol. In the next table the electrical characteristics of the standard are defined.

    The RS-485 module for Arduino and Raspberry allows users to perform industrial and domotic applications. The RS-485 is the most versatile communication standard in the standard. This a standard defining the electrical characteristics of drivers and receivers for use in digital systems. It does not specify or recommend any communications protocol. In the next table the electrical characteristics of the standart are defined.

    This kit includes:
    - RS-485 / Modbus Module for Arduino, Raspberry Pi and Intel Galileo
    - Raspberry Pi to Arduino Shields Connection Bridge

    RS-485
    Standard EIA RS-485
    Physical Media Twisted pair
    Network Topology Point-to-point, Multi-dropped, Multi-point
    Maximum Devices 32 drivers or receivers
    Voltage Levels -7V to +12V
    Mark(1) Positive Voltages (B-A > +200mV)
    Space(0) Negative voltages (B-A < -200mV)
    Available Signals Tx+/Rx+, Tx-/Rx-(Half Duplex)Tx+,Tx-,Rx+,Rx-(Full Duplex)

    Documentation:
    Tutorial

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  19. SX1272 LoRa Shield for Raspberry Pi - 868 MHz

    SX1272 LoRa Shield for Raspberry Pi - 868 MHz

    Excl. Tax: € 85,00 Incl. Tax: € 102,85

    The SX1272 LoRa module main advantage is the reach increasing but also the cost saving respect other similar modules like XBee 868 or XBee 900. The SX1272 LoRa module uses the SPI bus. The SPI port allows more speed communication and frees up the UART for other purposes like debugging or to connect communication modules.

    It comes with a 868 MHz antenna to be used in this frequency.

    This kit includes:
    SX1272 LoRa module for Arduino, Raspberry Pi and Intel Galileo - 868 MHz
    Raspberry Pi to Arduino Shields Connection Bridge

    Documentation:
    Tutorial

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    - Access to the complete list of kits and accessories of SX1272 LoRa module for Arduino, Raspberry Pi and Intel Galileo here.

    You can see all the LoRa modules for Waspmote here.

    Saber más
  20. GPS shield for Raspberry Pi

    GPS shield for Raspberry Pi

    Excl. Tax: € 82,00 Incl. Tax: € 99,22

    GPS shield for Raspberry Pi is a small electronic circuit that allows to connect to your Raspberry Pi board to get position and altitude, as well as speed, date and time on UTC (Universal Time Coordinated). GPS antenna is not included. It is sold as an optional and it is required to use the module.


    This kit includes:
    - GPS Module for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for GPS shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  21. HVAC IR Remote Shield for Raspberry Pi

    HVAC IR Remote Shield for Raspberry Pi

    Excl. Tax: € 70,00 Incl. Tax: € 84,70

    IR Remote is a small shield that allows you to record any infrared command sent by a remote control and resend it from the Internet. It works connected to Arduino UNO and Raspberry Pi, and let us to control any HVAC system including heating,ventilationair-conditioning and thermostats from the Cloud.

    This kit includes:
    - IR Remote Module for Arduino UNO / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial: IR Remote Module for Arduino / Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Note: IR Remote has been developed and programmed in order to work with Arduino UNO. It is Hardware Compatible with most Arduino boards, but there are no available tested codes. Raspberry Pi also support this hardware, although due to kernel priorities IR module does not work correctly with ArduPi.

    Saber más
  22. SX1272 LoRa Shield for Raspberry Pi - 900 MHz

    SX1272 LoRa Shield for Raspberry Pi - 900 MHz

    Excl. Tax: € 85,00 Incl. Tax: € 102,85

    The SX1272 LoRa module main advantage is the reach increasing but also the cost saving respect other similar modules like XBee 868 or XBee 900. The SX1272 LoRa module uses the SPI bus. The SPI port allows more speed communication and frees up the UART for other purposes like debugging or to connect communication modules.

    It comes with a 900 MHz antenna to be used in this frequency.

    This kit includes:
    SX1272 LoRa module for Arduino, Raspberry Pi and Intel Galileo - 900 MHz
    Raspberry Pi to Arduino Shields Connection Bridge

    Documentation:
    Tutorial

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    - Access to the complete list of kits and accessories of SX1272 LoRa module for Arduino, Raspberry Pi and Intel Galileo here.

    You can see all the LoRa modules for Waspmote here.

    Saber más
  23. Wifi shield for Raspberry Pi

    Wifi shield for Raspberry Pi

    Excl. Tax: € 80,00 Incl. Tax: € 96,80

    Featured in:  Postscapes

    Wifi shield for Raspberry Pi allows to communicate your Raspberry Pi with your router through WiFi protocol. The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware.


    This kit includes:
    - Wifi module "Roving RN-XVee" for Arduino / Raspberry Pi
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for Wifi shield for Raspberry Pi
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

     

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  24. Shield - Proto PCB Rev3

    Shield - Proto PCB Rev3

    Excl. Tax: € 4,00 Incl. Tax: € 4,84

    Arduino Protoshield te permite montar y añadir tus propios circuitos en tu placa Arduino.

    Tutorial

    Saber más
  25. e-Health Sensor Shield V2.0 for Arduino, Raspberry Pi and Intel Galileo [Biometric / Medical Applications]

    e-Health Sensor Shield V2.0 for Arduino, Raspberry Pi and Intel Galileo [Biometric / Medical Applications]

    Precio habitual: € 90,75

    Precio especial: Excl. Tax: € 67,50 Incl. Tax: € 81,68

    Featured in:  Wired  and Postscapes

    NOTE: This product is compatible with Arduino, Raspberry Pi and Intel Galileo boards. See below the links to each of the tutorials.

    The e-Health Sensor Shield allows Arduino and Raspberry Pi users to perform biometric and medical applications where body monitoring is needed by using 9 different sensors. This information can be used to monitor in real time the state of a patient or to get sensitive data in order to be subsequently analysed for medical diagnosis. Biometric information gathered can be wirelessly sent using any of the 6 connectivity options available: Wi-Fi, 3G, GPRS, Bluetooth, 802.15.4 and ZigBee depending on the application.

    You can find our e-Health Sensor Platform Complete Kit to get a complete First Aid Kit for Makers or get the sensors separately:

    - Pulse and oxygen in blood sensor (SPO2)
    - Airflow sensor (breathing)
    - Body temperature sensor
    - Electrocardiogram sensor (ECG)
    - Glucometer sensor
    - Galvanic skin response sensor (GSR - sweating)
    - Blood pressure sensor (sphygmomanometer) V2.0 New Sensor
    - Patient position sensor (Accelerometer)
    - Electromyography Sensor (EMG) New Sensor

    IMPORTANT: The e-Health Sensor Platform has been designed by Cooking Hacks in order to help researchers, developers and artists to measure biometric sensor data for experimentation, fun and test purposes. However, as the platform does not have medical certifications it can not be used to monitor critical patients who need accurate medical monitoring or those whose conditions must be accurately measured for an ulterior professional diagnosis.

    Documentation:
    Tutorial Arduino: e-Health Sensor Platform for Arduino [Biometric / Medical Applications]

    Tutorial Raspberry Pi: e-Health Sensor Platform for Raspberry Pi [Biometric / Medical Applications]
    Tutorial Intel Galileo: e-Health Sensor Platform for Intel Galileo [Biometric / Medical Applications]

    Note: If you are looking for using this shield with your Raspberry Pi, you must use our Raspberry Pi to Arduino Shields Connection Bridge.

    Saber más
  26. Communication Shield (XBee, Bluetooth, RFID) - XBee Shield

    Communication Shield (XBee, Bluetooth, RFID) - XBee Shield

    Excl. Tax: € 15,00 Incl. Tax: € 18,15

    This shield allows to use XBee modules or our Bluetooth or RFID modules.

    Documentation:
    Arduino XBee Tutorial

    Saber más
  27. BLE-Shield based on Bluegiga's BLE112 Module

    BLE-Shield based on Bluegiga's BLE112 Module

    Excl. Tax: € 85,00 Incl. Tax: € 102,85
    The Bluetooth Low Energy (BLE) Shield for Arduino is a Shield that enables Arduino projects to communicate with Bluetooth Smart enabled devices such as iPhones, iPads and iPods without Jailbreaking.
    Simply attach the BLE Shield to an Arduino and read and write data from and to an Arduino using the serial port. The serial port can be the hardware Serial on pins 0 and 1 or a software serial port on pins 2 and 3. The selection is done using the switch S1 on the BLE-Shield.
    Features
    • Based on Bluegiga's BLE112 Bluetooth 4.0 single mode compliant module
    • Open Source Hard- and Firmware
    • Open Source iPhone App
    • No library necessary to operate the Shield with an Arduino
    • Compatible with iOS devices such as: iPhone4S, iPhone5, iPad 3rd gen, iPad 4th gen, iPad Mini, iPod Touch 5th gen
    • Tested with Arduino Uno, Arduino Duemilanove, Arduino Decimilia,Freetronics Eleven, Seeeduino v3.0
    • Baudrate 19.200
    • Configurable UART Pins 0/1 (Hardware Serial), 2/3 (Software Serial)
    • 16 byte receive buffer, which must be filled up using the Arduino before the buffer is written to the GATT.
    App
    BLExplr, which is an iOS App by Dr. Michael Kroll to Scan for BLE peripherals, discover their services and characteristics and even read and write to them is available at the Apple App Store. BLExplr can be purchased from the following link.
    Documents
    The Schematic, Boardfiles, Firmware Sources and the iPhone App sources are available on Dr. Michael Kroll's github repository which can be accessed using the following URL.
    Saber más
  28. Arduino Shield - Proto KIT

    Arduino Shield - Proto KIT

    Excl. Tax: € 9,00 Incl. Tax: € 10,89

    The Arduino Prototyping Shield makes it easy for you to design custom circuits for your next Arduino project.

    You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits if you need to as well. It's a convenient way to make your custom circuit and Arduino into a single module.

    Hundreds of thousands of Arduino boards are already fueling people's creativity all over the world, everyday. Join us now, Arduino is you!

    Summary Requires and Arduino board (not included) Arduino 1.0 pinout Large 0.1" prototyping area Reset button 14 pin SMD footprint (50 mils pitch) 20 pin Trough Hole footprint (100 mils pitch) SPI header long and easy-to-solder ground / 5V rails The 1.0 standard pinout consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses.

    Saber más
  29. 3G / GPRS shield for Raspberry Pi (3G+GPS) + Audio/Video Kit

    3G / GPRS shield for Raspberry Pi (3G+GPS) + Audio/Video Kit

    Excl. Tax: € 220,00 Incl. Tax: € 266,20

    New Camera! Now 2MP (1600 x 1200) - UXGA resolution

    This 3G shield for Raspberry enables the connectivity to high speed WCDMA and HSPA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new "Internet of Things" era using your Raspberry Pi. Antennas not included.

    This kit includes:
    - 3G/GPRS Shield for Arduino / Raspberry Pi (3G+GPS) + Audio / Video Kit
    - Raspberry Pi to Arduino Shield Connection Bridge

    Documentation:
    - Tutorial for 3G/GPRS Shield for Raspberry Pi (3G+GPS) + Audio / Video Kit
    - Tutorial for Raspberry Pi to Arduino Shield Connection Bridge

    Note: If you are looking for shields to add new capabilities to your Raspberry Pi, you can find them here.

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    NOTE: If you are looking for a complete GPRS+GPS Solution, don't hesitate to visit our GPRS+GPS Quadband Module for Arduino/Raspberry Pi (SIM908).

    NOTE: If you only need to send SMS or use a low bandwidth for data transfer you can use our cheaper GPRS/GSM Quadband SIM900 module for Arduino.

    Saber más
  30. 0.5 inch OLED display Arduino shield

    0.5 inch OLED display Arduino shield

    Excl. Tax: € 22,00 Incl. Tax: € 26,62
    OCELL is a 0.5 inch OLED module designed as a  Arduino shield and also available for other  micro controllers . It is the smallest Arduino display module you can find so far. You could connect it to Ardunio micro directly without doing any PCB layout and also available for other controllers . It is a good choice for a DIYer to make a project which need a tiny COOL OLED display. Features:  1. The smallest size in all Arduino display modules so far. 2. Very high contrast and brightness. 3. Very low power consumption 4. No backlight required 5. Supported by U8glib library High light : These OLED displays are small, only about 0.5" diameter, but very readable due to the high contrast (450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast and very low power consumption.   Specification? PCB dimensions: 17.8mm X 15.5mm Screen size: 0.5 (inch) W. H: 15.30x10.20 mm Color: Monochrome (white) OLED  type: PM -OLED OLED driver: LD7032 Pixels : 60 x 32 Contrast: 2000: 1 Communication: SPI, I2C Notice: 1 pc OCELL includes: 1x module PCB , 1x OLED display , 1x10 pins header Does not include: Arduino    U8glib Library download: Library U8lib libary WIKI:  https://code.google.com/p/u8glib/wiki/gallery OCELL User Guide? uesr guide                                        0.5 OLED  SPEC                                       Device Spec For any technical support or suggestion, please kindly go to our forum. Saber más
  31. 1Sheeld - Replace your Arduino shields with smartphone

    1Sheeld - Replace your Arduino shields with smartphone

    Excl. Tax: € 64,35 Incl. Tax: € 77,86
    Imagine an Arduino Shield that can be configred to be an LCD, GPS, Wuifi, or any shield you may think of!     1Sheeld is a new easily configured shield for Arduino. It is connected to a mobile app that allow the usage of all of Android smartphones' capabilities such as LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM, Wi-Fi, GPS …etc. into your Arduino sketch.   Basically, our product consists of two parts. The first part is a shield that is physically connected to your Arduino board and acts as a wireless middle-man, piping data between Arduino and any Android smartphone via Bluetooth. The second part is a software platform and app on Android smartphones that manages the communication between our shield and your smartphone and let your choose between different available shields.   By doing that, you can use 1Sheeld as input or output from Arduino and make use of all of the sensors and peripherals already available on your Android smartphone instead of buying the actual shields. You can use it to control an RC car using the phone's gyroscope, or even tweet when someone enters the room!   The objective of our product is to provide faster and cheaper ways of prototyping your Arduino projects.    We introduced a new dimension to Arduino shields, by using the power of smartphones to simplify the electronics prototyping process, we will provide the best and the most convenient solution for hobbyists who need affordable prototyping with the lowest costs.   What can you do with 1Sheeld? Sky is the limit! You have a powerful Android smartphone that can be used to control your RC car, tweet when plants are thirsty, and have fun playing with your friends.   We have already developed a variety of shields for 1Sheeld like LED, Toggle Button, Buzzer, Slider, LCD, 7-Segment, Keypad, Music Player, Game Pad, Notifications, Twitter, Facebook, Foursquare, Gyroscope, SMS, Flashlight and Mic. And we have many other Saber más
  32. 2.8'' TFT Touch Shield V2.0

    2.8'' TFT Touch Shield V2.0

    Excl. Tax: € 54,90 Incl. Tax: € 66,43
    2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a 4-wire resistive touch-screen. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ST7781R with 8bit data and 4bit control interface. Saber más
  33. 2A Motor Shield for Arduino Twin

    2A Motor Shield for Arduino Twin

    Excl. Tax: € 21,85 Incl. Tax: € 26,44
    Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. This motor shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output current up to 2A each channel.nbsp;Stack up ... Saber más
  34. 4A Motor Shield

    4A Motor Shield

    Excl. Tax: € 39,85 Incl. Tax: € 48,22
    The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Arduino/Seeeduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features.    The on board DC/DC converter suport a very wide range of input voltage, and can provide a 5V power supply for the microcontroller board with 100mA maximun current.So, you just need one power supply to drive the motors and power up the logic circuit.   Specifications Operating Voltage: 6V ~ 28V  DC/DC output: 5V 100mA @ "5V" pin Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak) Output Duty Range: 0%~100%  Output short-circuit protection (short to VPWR or GND) Over-current limiting (regulation) via internal constant-off-time PWM  Temperature dependant current limit threshold reduction     Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.   Saber más
  35. 4x4 Driver Shield

    4x4 Driver Shield

    Excl. Tax: € 57,60 Incl. Tax: € 69,70
    Description: The 4x4 Driver Shield is designed to enable users to switch DC loads up to 5A at up to 30V with no heat-sinking. It is ideal for such applications as driving solenoids, relays, and small DC motors. It uses International Rectifier IPS6044 quad channel fully-protected high side MOSFET switches, which include over-temp, over-current, and under-voltage protection. The high-side topology is safer in many applications than the more common low-side topology because a short to ground cannot energize the circuit while the switch is turned off, as it can with a low-side switch.This shield can also be used to drive four unipolar stepper motors.

    The board is built with generous traces to handle the current with minimal voltage loss and heating on the board. A pair of 74AHCT595 8-bit shift registers allow the control of sixteen high current channels from only four Arduino pins using the shiftOut() function, and make it possible to daisy-chain as many as 25 boards off a single host, for a total of 400 high current channels.

    Saber más
  36. 6 DOF IMU Shield

    6 DOF IMU Shield

    Excl. Tax: € 27,70 Incl. Tax: € 33,52

    Introduction

    This is a 6 Dof IMU shield for Arduino, using the ADXL345 accelerometer and the ITG-3200 gyro.This IMU Combo shield also embeded a xbee sockets. So it's suitable for the projects that need bluetooth, wifi or Zigbee wireless communication.And the shield extends a pair of the encoders, the motor driver interface and 4 analog input connectors.
    It's aimed to run on the balancing robots or mobile platforms. The encoder and motor driver interfaces are the necessary parts of the your robots. Plugin the rotation sensors to the analog connectors, then you get the most easy way to adjust the system parameters and debug the platform.
    Applications
    • Motion-enabled game controllers
    • Personal navigation devices
    • Balancing robots
    • Industrial instrumentation
    Saber más
  37. Adafruit Wave Shield for Arduino Kit - v1.1

    Adafruit Wave Shield for Arduino Kit - v1.1

    Excl. Tax: € 28,60 Incl. Tax: € 34,61
    Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to 22KHz, 12bit uncompressed audio files of any length. It's low cost, available as an easy-to-make kit. It has an onboard DAC, filter and op-amp for high quality output. Audio files are read off of an SD/MMC card, which are available at nearly any store. Volume can be controlled with the onboard thumbwheel potentiometer. Saber más
  38. Arduino Ethernet Shield with PoE Module

    Arduino Ethernet shield rev3 with poe module

    Excl. Tax: € 44,90 Incl. Tax: € 54,33

    Introduction

    The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
    The R3 version brings to this shield the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses.
    The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). It also adds a separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.
    Specification
    • Compatible with Arduino Mega2560/Uno rev3 standard pinout
    • Micro SD card connector with active voltage translators
    • Power Over Ethernet ready
    • On board reset controller
    • NOW Compatible with the Arduino MEGA board
    Saber más
  39. Arduino Ethernet W/ PoE + USB2Serial shield

    Arduino Ethernet W/ PoE + USB2Serial shield

    Excl. Tax: € 69,00 Incl. Tax: € 83,49
    The Arduino Ethernet is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack, an ICSP header, and a reset button. NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs. It includes a Power over Ethernet module that can be added to the board as well. The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield. An onboard microSD card reader, which can be used to store files for serving over the network, is accessible through the SD Library. Pin 10 is reserved for the Wiznet interface, SS for the SD card is on Pin 4. A six pin header can be connected to a FTDI breakout board or USB Serial board to provide USB power and communication to the board. Power The board can also be powered via an external power supply, an optional Power over Ethernet (PoE) module, or by USB using the included Serial2USB shield. External power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts. Specification - Microcontroller: ATmega328 - Operating Voltage: 5V - Input Voltage (recommended): 7-12V - Input Voltage (limits): 6-20V - Digital I/O Pins: 14 (of which 4 provide PWM output) - Arduino Pins reserved - 10 to 13 used for SPI - 4 used for SD card - 2 W5100 interrupt (when bridged) - Analog Input Pins 6 - DC Current per I/O Pin: 40 mA - DC Current for 3.3V Pin: 50 mA - Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader - SRAM 2 KB (ATmega328) - EEPROM 1 KB (ATmega328) - Clock Speed 16 MHz - W5100 TCP/IP Embedded Ethernet Controller - Power Over Ethernet ready Magnetic Jack - Micro SD card, with active voltage translators Documents - Arduino Ethernet POE Website - Schematics Saber más
  40. Arduino Expansion Shield for Raspberry Pi

    Arduino Expansion Shield for Raspberry Pi

    Excl. Tax: € 37,75 Incl. Tax: € 45,68
    What's the difference between Pi and Arduino? We all know Raspberry Pi is a mini-computer running on Linux operating system; while Arduino is a microcontroller running on simple I/Os. Both of them focuses on very different areas. Compared with Arduino, the Pi gets much better computing performa... Saber más
  41. Arduino Expansion Shield for Raspberry Pi B+

    Arduino Expansion Shield for Raspberry Pi B+

    Excl. Tax: € 22,00 Incl. Tax: € 26,62
    What's the difference between Pi and Arduino? We all know Raspberry Pi is a mini-computer running on Linux operating system; while Arduino is a microcontroller running on simple I/Os. Both of them focuses on very different areas. Compared with Arduino, the Pi gets much better computing performance. So What happens when a Pi meets an Arduino? A simple example would be, when building a mobile robot, we use the Raspberry Pi to extend its vision and get a nice tiny monitor. Meanwhile, Arduino handle nicely with the motor driving part and delivers fast responses like obstacle avoidance. Because, without the OS, the response time of rapid changes on the Arduino is much shorter. Also the high performance Pi can deals much easily with wireless communications, imaging and running complex algorithm. Therefore, with the Arduino and Pi together, you get a powerful "brain" and "cerebellum" for your project, at one time.
    Onboard Microcontroller: ATmega32u4 Arduino Leonardo Chip Arduino Compatible pin mapping Compatible with All arduino standard shield and sensors System Voltage: 5v Arduino Digital I/O: 23 Arduino Analog I/O: 12 Raspberry Pi B+ GPIO: 16 Raspberry Pi B+ I2C: 1 Raspberry Pi B+ ID_I2C: 1 Raspberry Pi B+ SPI: 1 Raspberry Pi B+ TTL UART: 1 Dimension: 88mm x 56mm x 26mm
    Relay Module V3.1 for IOT AC control Analog pH Meter Kit for monitoring Water quality of your pool SHT1x Humidity and Temperature Sensor Motion Sensor for security and human detection A nice and low cost LCD12864 display 2A Motor Shield for robot building Dual Bipolar Stepper Motor Shield GSM/GPRS and GPS Shield
    Wiki Doc Sch Saber más
  42. Arduino ProtoShield - Bare PCB

    Arduino ProtoShield - Bare PCB

    Excl. Tax: € 3,75 Incl. Tax: € 4,54
    Description: By popular request, we're selling the always-handy ProtoShield PCB on its own! Originally spawned with collaboration between the folks at SFE and ITP @ NYU, the ProtoShield mates with an Arduino development board and gives the user a small soldering area, two general LED footprints, access to a BlueSMiRF socket, a general pushbutton switch footprint, and most important of all - the Arduino reset switch is brought to the top level.

    Now you don't need to buy the whole ProtoShield kit if you just need a piece of prototyping board that will fit on top of your Arduino. You might want to grab a stackable header kit, though, which you can find in the related items below.

    Documents:

    Saber más
  43. Arduino Wi-Fi Shield

    Arduino Wi-Fi Shield

    Excl. Tax: € 106,35 Incl. Tax: € 128,68
    Description: The Arduino WiFi Shield allows an Arduino board to connect to the internet using the 802.11 wireless specification (WiFi). It is based on the HDG104 Wireless LAN 802.11b/g System in-Package. An Atmega 32UC3 provides a network (IP) stack capable of both TCP and UDP. Use the WiFI library to write sketches which connect to the internet using the shield. The WiFI shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
    There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega. The onboard microSD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4.
    Saber más
  • Ardumoto - Motor Driver Shield

    Ardumoto - Motor Driver Shield

    Excl. Tax: € 18,50 Incl. Tax: € 22,39

    The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.

    This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board,  includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.

    Control for motor attached to OUT1/2 is connected to digital line 12 (direction A) and digital line 3 (PWM A).

    Control for motor attached to OUT3/4 is connected to digital line 13 (direction B) and digital line 11 (PWM B).

    Compatible screw terminals and connectors are listed below.

    Documents:

    Saber más
  • AVR ISP Shield - PTH Kit

    AVR ISP Shield - PTH Kit

    Excl. Tax: € 16,10 Incl. Tax: € 19,48

    Description: Did you know that your Arduino can spawn other Arduinos? Don't worry, it can't do it autonomously so you won't wind up with a replicator situation (-gate, not -Trek). The point is, the ArduinoISP sketch allows your Arduino to act as a programmer. You can use this awesome power to burn bootloaders onto ATMega chips, turning them into Arduino-compatible microcontrollers! In the past, this required a breadboard and a whole mess of jumper wires but we've just made it a ton easier on you with the AVR ISP Shield!

    This shield, once assembled, gives your Arduino a 28-pin ZIF (Zero Insertion Force) socket so it can grab onto unsuspecting ICs. The socket is wired to work directly with the ArduinoISP code, but burning bootloaders isn't the only thing you can do with it. We've also connected the serial I/Os so that if you're a programming ninja you can do cool tricks like programming ICs using the bootloader on-the-go.

    Kit Includes:

    • AVR ISP Shield
    • 28-Pin ZIF Socket
    • AVR Programming Cable
    • 40-Pin Straight Headers

    Documents:

    Saber más
  • Bees Shield

    Bees Shield

    Excl. Tax: € 15,00 Incl. Tax: € 18,15

    Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software serial port for easier prototyping.

    Features

    • Dual Bee type socket
    • 3 indicator LED(ON/Sleep, RSSI, ASSOC)for each Xbee
    • Full size with free drills
    • Reset button for each Xbee
    • Reset button for base board
    • Provide maximal 500mA under 3.3V
    • Full break out for each Bee
    • Switchable of communication with FTDI-USB /Base board

    Bees Shield



    Description

    Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software?serial?port?for?easier prototyping.

     

    Bees shield topview

     

    Features

    • Dual Bee type socket?
    • 3 indicator LED(ON/Sleep, RSSI, ASSOC)for each Xbee?
    • Full size with free drills?
    • Reset button for each Xbee?
    • Reset button for base board?
    • Provide maximal 500mA under 3.3V?
    • Full break out for each Bee?
    • Switchable of communication with FTDI-USB /Base board
    Documents

    Please visit our?wiki page for more info about this product. It will be appreciated if? you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our?forum.?

    This product was added to our catalog on Thursday 01 July, 2010.


    Ratings & Reviews Sort by: Write a comment

    Questions & Answers Ask questions



    Saber más
  • Bluetooth 4.0 Low Energy-BLE Shield v2.1

    Bluetooth 4.0 Low Energy-BLE Shield v2.1

    Excl. Tax: € 25,60 Incl. Tax: € 30,98
        BLE Shield stands for Bluetooth Low Energy (BLE) Shield. It is designed to work with Arduino boards or compatibles, including Arduino Uno, Mega 2560, Leonardo and Due. It allows you to connect your Arduino boards with other BLE Central device like a smartphone or tablet. So you can develop some applications like: • Control your Arduino pins with our/your own mobile App • Send sensor data from your Arduino to an App for processing • Use your mobile device as an internet gateway for your Arduino • and much more! BLE shield could operate under 3.3V or 5V, therefore it works with a lot of Arduino compatible boards too.   New Features in BLE Shield Version 2.1 1. Reset button is changed to "side button" 2. nRF8001 SPI pins can be set to either Pins 11-13 on the side or ICSP, this allows other Arduino compatible boards with no ICSP header such as FRDM-KL05 board, RedBoard and so on to interface with the nRF8001 BLE chip 3. Flexible REQN and RDYN pins selectable from pin 2 to 10 4. The board is shorter than before and this allows it to fit on Arduino Yun physically    Features Since v2.0 1. Besides the on-board PCB antenna, option to use SMA connector for external antenna (soldering is required) 2. Flexible REQN and RDYN pins selectable from pin 2 to 12, these pins are fixed at 8 & 9 for BLE Shield v1 3. Reset button also resets the Arduino board, and vice versa 4. ICSP header provides Vcc (for other shields to get power source) 5. ICSP header now passes through (for other shields to connect to the SPI) 6. Shield's reset is controllable by Arduino pin 4 or 7 7. Reset signal to the shield is now active low (i.e. pull low to reset the shield) 8. Added test points for power consumption measurement of the nRF8001 chip (soldering is required) 9. Added circuitry and test pin (J9 NC) for measurement of instant working current (using logic analyzer, 1mA = 100mV).   Supported BLE Central Devices iOS 7 • iPhone 4s • Saber más
  • Bluetooth Module for Arduino, Raspberry Pi and Intel Galileo

    Bluetooth Module for Arduino, Raspberry Pi and Intel Galileo

    Precio mínimo: € 48,00

    NOTA: ESTE PRODUCTO HA SIDO RETIRADO. PUEDE ADQUIRIR LA VERSIÓN PRO AQUÍ.

    Bluetooth Module for Arduino puede conectarse directamente en la Placa de XBee y obtener una comunicación serie entre el ordenador y una placa Arduino a través del protocolo Bluetooth.

    Documentacion:
    Tutorial Bluetooth
    Bluetooth Videotutorial


    Opciones especiales:
    - Umbrales de control RSSI mínimo y máximo
    - Salto de frecuencia adaptable
    - Seguridad: autenticación, vinculación y cifrado
    - Almacena 5 dispositivos vinculados en su memoria interna
    - Soporta modos de maestro o esclavo

    Descarga aquí la librería Fritzing para incluir en tus diseños electrónicos.

    Nota: Si está buscando dispositivos de Redes Sensoriales Inalámbricas (WSN) (motes) podría estar interesado en nuestra plataforma sensorial lista para el mercado: Waspmote. Puedes ver las diferencias entre ambas plataformas en el documento: Waspmote vs SquidBee.

    Saber más
  • Bluetooth Shield

    Bluetooth Shield

    Excl. Tax: € 21,35 Incl. Tax: € 25,83
    The Bluetooth Shield integrates a Serial Bluetooth module. It can be easily used with Arduino/Seeedstudio for transparent wireless serial communication. Saber más
  • Cellular Shield with SM5100B

    Cellular Shield with SM5100B

    Excl. Tax: € 79,50 Incl. Tax: € 96,20

    Description: The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to your Arduino project is a SIM card (pre-paid or straight from your phone) and an antenna and you can start sending Serial.print statements to make calls, send texts and serve web pages!

    The main components of the Cellular Shield are a 60-pin SM5100B connector, a SIM card socket, and an SPX29302 voltage regulator configured to regulate the Arduino's raw voltage to 3.8V. The board's red LED indicates power. The Arduino's reset button is also brought out on the shield.

    Two solder jumpers on the board allow you to select which serial pins interface with the cellular module - software (D2, D3) or hardware (D0, D1). There is also a 5-pin, 0.1" spaced header with connections for microphone inputs and speaker outputs. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.

    The SM5100B cellular module is included with this product, however an antenna is not. It is pre-configured to 9600bps.

    Documents:

    Saber más
  • Codec Shield

    Codec Shield

    Excl. Tax: € 40,85 Incl. Tax: € 49,43
    Description: The Open Music Labs Codec Shield gives your Arduino (or Maple) development board access to the all of the audio processing power of the Wolfson WM8731 codec. The WM8731 is a low-power stereo audio codec with stereo 24-bit multi-bit sigma delta ADCs and DACs which are used with oversampling digital interpolation and decimation filters. Thanks to the variable sampling frequency of the codec, even the relatively slow Arduino can grab and alter audio in real-time.

    The Codec Shield breaks out all of the useful pins on the WM8731 including the mic, line-in and out, headphone, and midrail bias voltage pin. It also has 1/8" stereo input and headphone out jacks as well as a pair of potentiometers for modulating parameters in your code.

    The shield uses SPI to communicate with the WM8731 so it won't work directly with the Arduino Mega, but getting started on an Arduino-UNO style board or LeafLabs Maple is easy! Just download the library and example code, hook up and audio source and start tweaking.

    Obviously you don't have much time to execute code between audio samples, so your code will need to stay pretty slim, but the example code gives a great framework for how your code should flow. Open Music Labs claims a performance increase of 4x when running the shield on a Maple (thanks to the higher clock speed).

    Saber más
  • Color LCD Shield

    Color LCD Shield

    Excl. Tax: € 29,00 Incl. Tax: € 35,09

    The Color LCD Shield, recommended by and designed in partnership with an SFE customer, provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB or Pro. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5).

    The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the '5V' pin of the Arduino is boosted to 7V to power the LCD backlight.

    The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.

    Documents:

    Saber más
  • Component Shield For FEZ Domino

    Component Shield For FEZ Domino

    Excl. Tax: € 23,85 Incl. Tax: € 28,86

    Introduction

    This is the component shield for FEZ Domino. Just like our Arduino IO Expansion Shield, you can easily connect sensors, buttons to this component shield. This shield is also compatible with Arduino.

    Saber más
  • Danger Shield

    Danger Shield

    Excl. Tax: € 22,00 Incl. Tax: € 26,62

    The Danger Shield mounts on top of your Arduino orArduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can't wait to see what you're able to do with it! The shield's features include:

    • Three linear slide potentiometers connected to the Arduino's analog pins 0 through 2.
    • Red and yellow LEDs connected to digital pins 5 and 6 - PWM pins - so you can easily vary their brightness.
    • Three momentary push buttons connected up to the Arduino's digital pins 10 through 12. Those lines will go low when the buttons are pressed.
    • A photocell and a temperature sensor, both with analog outputs, are connected to the analog pins 3 and 4, respectively.
    • An 8-bit shift register set up to control a blue 7-segment LED.
    • Two buzzers - one is used, as you'd expect, as a speaker, the other is connected to analog pin 5 and can be used as a knock sensor.

    This new version uses a different temperature sensor. This product comes as a kit of parts, which you'll have to solder into the included PCB. All parts are through-hole so it should go together relatively easily; but always check your component orientation before soldering!

    Documents:

    Saber más
  • Danger Shield Complete kits

    Danger Shield Complete kits

    Excl. Tax: € 23,90 Incl. Tax: € 28,92

    SPECIAL OFFER WHILE STOCKS LAST!!

    The Danger Shield is an add-on for the [Arduino] micro controller board. It contains a variety of fun and useful electronic circuits that you can use to do fun and useful things. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components. Just a really rad board ready to rock.

    >>Guide

    Saber más
  • Digit Shield Kit (Green Colour)

    Digit Shield Kit (Green Colour)

    Excl. Tax: € 19,00 Incl. Tax: € 22,99
    The Digit Shield is a simple, low-cost Arduino shield that provides a four digit 7-segment display. An easy-to-use open source library makes it very simple to display integers and floating point numbers. Multiplexing of digits is implemented using a timer overflow interrupt handler for flicker-free display. Only uses 4 Arduino pins (2,3,4,5). All through-hole parts for easy kit assembly. Saber más
  • Digit Shield Kit (Red Colour)

    Digit Shield Kit (Red Colour)

    Excl. Tax: € 19,00 Incl. Tax: € 22,99

    The Digit Shield is a simple, low-cost Arduino shield that provides a four digit 7-segment display.

    • An easy-to-use open source library makes it very simple to display integers and floating point numbers.
    • Multiplexing of digits is implemented using a timer overflow interrupt handler for flicker-free display.
    • Only uses 4 Arduino pins (2,3,4,5).
    • All through-hole parts for easy kit assembly.
    • Red Colour
    Saber más
  • DTMF Shield

    DTMF Shield

    Excl. Tax: € 22,40 Incl. Tax: € 27,10
    This Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With it's audio connector you can decode the crazy funny noises common phones make. If you are not sure what I'm talking about, imagine a home phone while pressing several of its keys. These Touch-Tones have a specific f... Saber más
  • DTMF(Dual Tone Multi Frequency) Shield

    DTMF(Dual Tone Multi Frequency) Shield

    Excl. Tax: € 36,60 Incl. Tax: € 44,29
    The DTMF Shield for Arduino converts DTMF or Touch Tone signals into a format that microcontrollers (uC) or Arduino boards can understand. DTMF tones are analog signals that Arduino and most uC cannot read directly. This module converts those signals into a digital format that uC can easily read.   Here is the functional diagram of the DTMF Shield.     The DTMF Module is specifically designed to plug right into the Arduino boards, but it can also be used with a variety of microcontrollers.     Demo of DTMF Shield for Arduino     See other demo videos here.    Note: some these videos show an earlier board version with no Arduino headers. The formal version of sale has headers to right into an Arduino board   Features Operating Voltage: 5v, Current draw: 3mA Input signal range: 27.5 to 869mVrms  (-29 to 1dBm ) Trim pot for easy gain adjustment. 3.5mm stereo audio jack (TRS) and 0.1? standard interface headers LED to indicate tone decoded   Specification Dimension: 0.79? x 2.16?, 20mm x 55mm   Documents DTMF Shield User Manual  Library and Sample Sketch: download DTMF Module Schematics Datasheet for Holtek HT9170B DTMF decoder IC  Demo videos   If you encounter any problems when using this product, please contact here for technical support or visit forum of dossant. Saber más
  • EasyVR Shield 2.0 - Voice Recognition Shield

    EasyVR Shield 2.0 - Voice Recognition Shield

    Excl. Tax: € 60,25 Incl. Tax: € 72,90
    The EasyVR Arduino Shield is a multi-purpose speech recognition module designed to easily add versatile, robust and cost effective multi-language speech recognition capabilities to virtually any application developed on the Arduino platform.

    The EasyVR module can be used with any host with an UART interface powered at 3.3V 5V, such as PIC and Arduino boards. Some application examples include home automation, such as voice controlled light switches, locks or beds, or adding hearing to the most popular robots on the market.

    Features
    • A host of built-in speaker independent (SI) commands for ready to run basic controls. The commands are available in the following languages:
      • English (US)
      • Japanese
      • Italian
      • German
      • Spanish
      • French
    • Supports up to 32 user-defined Speaker Dependent (SD) triggers or commands (any language).
    • Supports Voice Passwords for biometric speech recognition.
    • 3 GPIO lines that can be controlled by new protocol commands.
    • PWM audio output that supports 8 ohm speakers.
    • Headphone jack.
    • Programmable LED.
    • Sound playback feature.
    • Easy-to-use and simple Graphical User Interface to program Voice Commands.
    • Module can be used with any host with an UART interface (powered at 3.3V - 5V) .
    • Simple and robust serial protocol to access and program the module through the host board.
    Whats in the Box:
    • EasyVR Arduino Shield
    • Microphone
    Please visitherefor documents and software.
    Saber más
  • EasyVR Shield 2.0 - Voice Recognition Shield

    EasyVR Shield 2.0 - Voice Recognition Shield

    Excl. Tax: € 58,50 Incl. Tax: € 70,79
    Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 2.0 is a voice recognition shield for Arduino boards integrating an EasyVR module. It includes all of the features of the EasyVR module in a shield form factor that simplifies connection to the Arduino main board and PC. EasyVR 2.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost effective speech and voice recognition capabilities to virtually any application. EasyVR is the third generation version of the successful VRbot module and builds on the features and functionality of its predecessor. In addition to the EasyVR 2.0 features like 28 user-defined Speaker Dependent (SD) triggers and 28 custom speaker independent (SI) commands, the shield has additional connectors for the microphone input, an 8 ohm speaker output, audio line-out/headphone jack, and access to the I/O pins of the EasyVR module. A programmable LED is also included to show feedback during recognition tasks.Features:A 28 custom speaker independent (SI) commands (available in US English, Italian, Japanese, German, Spanish, and French and more) for ready to run basic controls.Supports up to 32 user-defined Speaker Dependent (SD) triggers or commands (any language) as well as Voice Passwords.SonicNet to control one or more EasyVR 2.0s wirelesly with sound tokens generated by the module or other sound sourceDTMF tone generationEasy-to-use and simple Graphical User Interface to program Voice Commands to your robot.Module can be used with any host with an UART interface (powered at 3.3V - 5V) .Simple and robust serial protocol to access and program the module through the host board.Make your own sound tables using Sensory QuickSynthesis4 toolThe new EasyVR GUI includes a command to process and download custom sound tables to the module (overwriting existing sound table)Connector for microphone input8 ohm speaker outputHeadphone jackAccess to EasyVR I/O pinsProgra Saber más
  • Energy Shield

    Energy Shield

    Excl. Tax: € 30,60 Incl. Tax: € 37,03
    Energy Shield is a LiPo battery based power shield that keeps your project alive. It keeps its battery charged whenever an available power source exists. It accepts a wide range of power sources, from common solar cells via JST connector and USB via USB port on microcontroller, to 9V and 12V DC adapters via DC Jack on your Arduino. Meanwhile it can not only provide power for your Arduino project, with a standard USB port populated on the shield, it’s also capable of rescuing your mobile electric devices from dying batteries, such as mobile phone, mp3 and tablet.   Note: Headers of this product is shipped unsoldered.   Features Accept wide range of power inputs Overvoltage protection 85%+ high power conversion efficiency Comprehensive LEDs indicators for charging and working status   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • Gesture R "Shield"

    Gesture R "Shield"

    Excl. Tax: € 44,00 Incl. Tax: € 53,24
    GestureR is a single tiny module that includes Gesture Sensing, Proximity Sensing, and Ambient Light Sensing, they brings you to your DIY devices, with one of the latest technologies in advanced smartphones ! GestureR is the first gesture sensing shield you can find in the market, it is tiny ; inexpensive and user-friendly! KickStarter URL  GestureR SHIELD ULTRA  Size around 54 x 53 mm  Pin Configuration compatible to Arduino UNO and Leonardo  I2C PWM LED Driver.  1 Bright RGB LED and 12 Purple LEDs ease of use and demonstration.  2-channel DIP Switch to use for mode changing or any other purposes.  We also have Gesture R “bread” and Gesture R "Tiny", please click to check. Features? GestureR can communicate with any Arduino Host or other microcontrollers through I2C interface. Sample codes for most of the useful functions in Arduino format are available.   Gesture Sensing: GestureR can distinguish your gesture in 4 directions in 3 different speeds. Proximity Sensing: GestureR can sense the distance of an object up to 10cm from the sensor.   Ambient Light Sensing: GestureR can measure three level of ambient light.   Applications Gesture controlled control products such as AC Power; Appliance and lighting control.  GestureR + Relay Shields = Touchless Power Switch GestureR + IR Controller Shields = Smart Remote GestureR + LED Panel Shields = Smart Lamp Controller in hygiene environments   Specification of Gesture Sensor? Documents?  GestureR User Manual  GestureR Sample Codes  Schematic in Altium and pdf format  PCB de Saber más
  • Go-Between Shield

    Go-Between Shield

    Excl. Tax: € 14,75 Incl. Tax: € 17,85

    You hear it all the time in the Arduino community, "will this shield work with my other shield?." I think we've all been disappointed to find that two of our favorite shields compete for control of a digital pin here or a serial pin there. While there are sometimes some clever workarounds from elegant code modifications to aggressive 'greenwiring,' Mayhew Labs may have come up with the simplest solution thus far: The Go-Between Shield.

    The Go-Between Shield "goes between" two shields that aren't compatible and effectively reassigns the pins. This trickery is achieved by isolating the top and bottom sides of the shield with surface mount headers and breaking them out into tables of jumpers that can be bridged to divert signals to and from different pins. For instance: If you have two shields that require use of pin A1, you can simply close the correct jumper and stack the Go-Between shield between the two conflicting shields. Now the shield above the Go-Between will think it's using A1 when in reality it's connected to the Arduino's A0. Now your shields aren't stepping on each others' feet, so to speak.

    The Go-Between Shield is also a solution to some shield compatibility problems with Arduino clones such as the Maple or Netduino.

    Documents:


    Saber más
  • GPRS Dualband shield

    GPRS Dualband shield

    Excl. Tax: € 18,00 Incl. Tax: € 21,78

    GPRS Dualband shield allows you to use any GPRS module compatible with the Panasonic AXK5F60547YG socket.

    It doesn't include the communication module.

    If you are interested in an international GPRS solution for Arduino, we can offer our GPRS Quadband Module

    Documentation:
    Tutorial: basic guide for getting started with the module.
    Schematic
    Frequency maps

    Download the Fritzing library to include in your electronic designs here 
    Saber más
  • GPRS Shield V2.0

    GPRS Shield V2.0

    Excl. Tax: € 75,00 Incl. Tax: € 90,75
    Hook your Arduino up to GSM/GPRS cell phone network with GPRS shield! You can use your Arduino to dial a phone number or send a text to your friend via easy to use AT commands now. This new version features a quad-band low power consumption GSM/GPRS module SIM900 as well as a compact PCB antenna. Meanwhile, improvements on interfaces and basic circuit have been taken to make it more concise and reliable. Check out the improvement details of V2.0.
     
    Note: Headers of this product is shipped unsoldered.
     
    Features
    • Compatible with standard Arduino and Arduino Mega
    • Selectable interface between hardware serial port and software serial port
    • Quad band support: 850/900/1800/1900MHz
    • Support TCP/UDP protocols
    • Full control via AT commands set: Standard - GSM 07.07 07.05 and Enhanced - SIMCOM AT Commands
    • 2-in-1 headset jack
    • Convenient external SIM card holder
    • Low power consumption: 1.5mA(sleep mode)
    Saber más
  • Grove - Base Shield for IOIO-OTG

    Grove - Base Shield for IOIO-OTG

    Excl. Tax: € 7,05 Incl. Tax: € 8,53
    IOIO is a board specially designed to work with your Android device. And this Grove - Base Shield for IOIO is an expansion board for IOIO to work with abundant Grove resources. There are 6 ready Grove sockets on the board cevering functions like ADC and I2C. And in this way, all Grove Modules are accessible for the IOIO board. Wanna make some projects with IOIO and need some sensors or display? This Grove - Base Shield for IOIO can bring you this convenience.   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our  forum. Saber más
  • Grove - Protoshield

    Grove - Protoshield

    Excl. Tax: € 1,85 Incl. Tax: € 2,24
    This protoshield allows you to add your own circuitry or components to your Grove system prototypes. This allows you access to all four lines from the connector cable ? S0, S1, VCC and GND. There is also an extra normally-open button to take advantage of. The hole spacing makes using normal DIP-format ICs and other components very simple. You may wish to purchase more for future use in advance.

    Document
    Saber más
  • Interface Shield For Arduino

    Interface Shield For Arduino

    Excl. Tax: € 16,00 Incl. Tax: € 19,36

    SPECIAL OFFER WHILE STOCKS LAST!!

    This interface shield supports multi-interfaces, SPI interface (directly connected Shiftout module, SPI LCD display module, SPI LED display module), IIC Interface (direct connects IIC lCD display module, IIC transfer IO module), Micro SD card interface (Micro SD card can be directly inserted), SD card storage module interface, TLC full-color LED controller module. 

    Specification

    • Multi-function expansion board
    • Compatible with Arduino
    • Supports SPI Interface, IIC interfaces, SD card, TLC5940

    Documents

    Compability

    • Arduino UNO
    • Arduino Duemilanove
    • Arduino Mega 1280/2560 (Not compatible)
    Saber más
  • IO Expansion Shield for Arduino (V6)

    IO Expansion Shield for Arduino (V6)

    Excl. Tax: € 19,80 Incl. Tax: € 23,96
    Our IO expansion board is evolving, the V6 IO Expansion Shield is now supporting Xbee and has colour coded pin header. It combines our popularnbsp;Xbee shieldnbsp;withnbsp;IO expansion shield(V4). It even supportsnbsp;SD cardnbsp;which provides the ultimate functional expansion for Arduino so... Saber más
  • IoT Arduino Temperature and Humidity Probe Shield & Probes

    IoT Arduino Temperature and Humidity Probe Shield & Probes

    Excl. Tax: € 41,10 Incl. Tax: € 49,73
    Temperature and Humidity (T&H) remain top on the list for DIY Maker projects' sensing needs, many T&H sensorsare constructed from thermistor / low priced capacitive humidity sensor are not accurate for serious projects. This Temperature and Humidity Probe Shield offers a nice design T&H probe and shield made from IC sensor, the measurement range would satisfy different needs of DIY and product design requirements. The Penguin shape PCB attributed to Emperor penguin which breeds in the coldest environment and we believe the ultimate goal for IoT is about environment and species protection. This product has been funded on kickstarter.      Common Applications when using this product: Mini weather station Thermostat / Climate Control Intelligent Humidifier / De-Humidifier Control Storage Cupboard Temp / Humidity Control Horticulture / Greenhouse Temp / Humidity Control Features: Nice design Temperature and Humidity Probes for different project needs Arduino shield for up to maximum 4 T&H probes (Additional probes optional) Board Dimension 54 X 70mm 0.96 inch OLED Display Module (128 X 64) 3 User defined Keys IC form T&H sensor – with plastic probe case : Sensor IC : Temperature Range (-40 to +125 C) * Humidity Range : 0 to 100 % RH Temperature accuracy +/- 0.3 C typ. (@ 25 C) Humidity accuracy +/- 2% RH typ. (@ 25 C)  Specification: Package Includes T&H Probe Shield for Arduino X 1 0.96 inch OLED Display module X 1 Temperature and Humidity Probe with IC sensor X 1 Documents:   “Read Me” Quick Start Note   Hardware Schematic of Arduino Shield   Reference Arduino code library *Temperature ran Saber más
  • Joystick Shield - Bare PCB

    Joystick Shield - Bare PCB

    Excl. Tax: € 4,05 Incl. Tax: € 4,90
    Description: The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.

    The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low. Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

    This product is only the Joystick Shield PCB - you'll need to purchase the buttons and joystick separately, and assemble the controller yourself. Here's what you'll need in addition to the shield:

    • 4x Momentary Push Button Switch - 12mm Square
    • 1x Thumb Joystick
    • 1x Mini Push Button Switch (breaks out Arduino's reset switch)
    • 2x 6-pin Arduino Stackable Header
    • 2x 8-pin Arduino Stackable Header

    Documents:

    Saber más
  • Joystick Shield Kit

    Joystick Shield Kit

    Excl. Tax: € 10,85 Incl. Tax: € 13,13
    Description: The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers. Soldering is required, but it's relatively easy and requires minimal tools.
    The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

    This product is the entire kit and contains the following items:

    • 1x Joystick Shield PCB
    • 4x Momentary Push Button Switch - 12mm Square
    • 1x Thumb Joystick
    • 1x Mini Push Button Switch (breaks out Arduino's reset switch)
    • 2x 6-pin Arduino Stackable Header
    • 2x 8-pin Arduino Stackable Header

    Documents:

    Saber más
  • Joystick Shield PCB

    Joystick Shield PCB

    Excl. Tax: € 1,85 Incl. Tax: € 2,24

    The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.

    Please note: This is an older version of the PCB that does not have the prototyping area. The examples and assembly guides still apply. We're just trying to give these PCBs a happy home before we move on to the next revision.

    The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

    This product is only the Joystick Shield PCB - you'll need to purchase the buttons and joystick separately, and assemble the controller yourself. Here's what you'll need in addition to the shield:

    • 4 x Momentary Push Button Switch - 12mm Square
    • 1 x Thumb Joystick
    • 1 x Mini Push Button Switch (breaks out Arduino's reset switch)
    • 2 x 6-pin Arduino Stackable Header
    • 2 x 8-pin Arduino Stackable Header

    Documents:

    Saber más
  • LCD Button Shield

    LCD Button Shield

    Excl. Tax: € 15,80 Incl. Tax: € 19,12
    Do you need an easy to use interface for your LCD screen? The LCD Button Shield just might be your answer! Moving through menus and making selections straight from one stand-alone shield attached to your Arduino is a great way to cut down on your tower of shields. The LCD Button Shield consists of a 16x2, black character, green backlight LCD with a keypad consisting of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider. Check the link below for example code, schematics, and additional information.Note: Headers are included but not soldered.Documents:DatasheetProduct PageProduct Video Saber más
  • LiPower Shield

    LiPower Shield

    Excl. Tax: € 25,75 Incl. Tax: € 31,16
    Description: Is there anything an Arduino can't do? Well, for one, most of them can't be powered directly from a 3.7V LiPo battery; much less charge and monitor that battery. The LiPower Shield takes care of this by combining the functionality of two of our favorite battery power boards: the Power Cell and the Fuel Gauge.

    The LiPower Shield allows you to connect a 3.7V single cell Lithium polymer battery which it will boost up to 5V and connect to the Arduino board's 5V pin. The on-board MAX17043G+U IC is connected to the I2C lines (A4 and A5) so that your project can monitor it's own power supply. The configurable alert interrupt pin on the MAX17043G+U IC is broken out to D3 which will activate when the LiPo gets to 32% or lower.

    The charging circuit is configured to charge the LiPo at 100mA but by adding a resistor to the supplied through-holes you can boost this to 500mA. There is a mini-USB port on the shield which allows you to charge the battery from a USB power source or you can supply a separate regulated 5V source on the "charge" header.

    Note: We've decided to leave the power indicator LED (LED1) and its current limiting resistor (R3) off this board, as they were producing a significant drain on the battery. Please be aware that your board will have a few, shiny, unpopulated pads.

    Note: There is a known hardware bug that will allow the LiPo to discharge below the point where the charging circuit will revive it. Thanks to the on-board fuel gauge, however, some clever programming could keep your project from draining the battery as it gets too low.

    Documents:

    Saber más
  • Mega Prototyping Shield

    Mega Prototyping Shield

    Excl. Tax: € 7,00 Incl. Tax: € 8,47

    This is a design for an open-source prototyping shield for Arduino Mega. It has tons of cool features, to make prototyping on your Arduino easy.

    This is pre-assembled version. NO soldering is required.

    Features

    • Reset button up top 
    • Lots of GND and +5V rails 
    • DIP prototyping area makes it easy to add more chips
    Saber más
  • MegaShield Kit for Arduino

    MegaShield Kit for Arduino

    Excl. Tax: € 18,00 Incl. Tax: € 21,78

    The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a prototyping area, two general LEDs, and, most important of all, the Arduino Mega reset switch is brought to the top level. The shield also works with our small breadboards if you don't want to solder to the prototyping area.

    This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions! All soldering is through-hole (relatively easy) but always check your component orientation before soldering!

    Kit Includes:

    Features:

    • All Arduino Mega pins are brought to the top level
    • 5V and GND power busses
    • Power and stat (connected to D13) LEDs
    • Reset Button brought to top level

    Documents:

    

    Saber más
  • MIDI Shield

    MIDI Shield

    Excl. Tax: € 15,00 Incl. Tax: € 18,15

    SPECIAL OFFER WHILE STOCKS LAST!!

    The MIDI Shield board gives your Arduino access to the powerful MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI's event messages.

    Note: The MIDI Shield does not come with the through-hole MIDI connectors or trimpots soldered on. All of these components (2 MIDI connectors and 2 trimpots) are included with the product, however.

    Documents:

    Saber más
  • Mini FET Shield

    Mini FET Shield

    Excl. Tax: € 20,35 Incl. Tax: € 24,62
    Description: Developed by Dave Vondle and IDEO Labs, this board is essentially the same as our Power Driver Shield, but the through-hole parts have been switched out for smaller SMD construction, allowing you to to drive high-current switches with your Arduino Pro Mini. This is a great shield for small prototyping.

    Note: The power circuit chip is only rated to drive 0.6 amps. However, we've successfully tested it to over 2A.

    Documents:

    Saber más
  • Modkit MotoProto Shield

    Modkit MotoProto Shield

    Excl. Tax: € 27,25 Incl. Tax: € 32,97
    Description: The Modkit MotoProto Shield for Arduino that makes it easy to connect up to 4 sensors and control two DC motors as well as a 16X2 character LCD. The sensor jacks accept 2.5mm cables and provide access to VCC, GND, and an analog input.

    Sensors can be soldered to a 2.5mm cable and you can begin plug-and-play prototyping with a wide assortment of our sensors including line sensors, ultrasonic distance sensors, light sensors, photo interrupter, etc. There is also a large programmable button and a space for an i2c header to connect more advanced sensors such as an accelerometer.

    The motor driver circuit is based on the L298 H-bridge and can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.

    Modkit develops a drag-and-drop graphical programming environment inspired by Scratch for Arduino and Arduino compatible boards, making it easier than ever to program your physical project. The Modkit MotoProto Shield is well suited for general projects, prototyping, and educational robotics.

    For a limited time, purchase a Modkit MotoProto Shield and receive a free invite to try Modkit's programming environment before it is released to the public. The shield can also be programmed with the Arduino development environment.

    Note: This product is a collaboration with ModKit. A portion of each sales goes back to them for product support and continued development.

    Documents:

    Saber más
  • Monster Moto Shield

    Monster Moto Shield

    Excl. Tax: € 65,40 Incl. Tax: € 79,13
    Description: This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.

    Note: When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.

    Features:

    • Voltage max: 16V
    • Maximum current rating: 30 A
    • Practical Continuous Current: 14 A
    • Current sensing available to Arduino analog pin
    • MOSFET on-resistance: 19 m (per leg)
    • Maximum PWM frequency: 20 kHz
    • Thermal Shutdown
    • Undervoltage and Overvoltage shutdown

    Documents:

    Saber más
  • Motor Shield V2.0

    Motor Shield V2.0

    Excl. Tax: € 20,00 Incl. Tax: € 24,20
    The Motor Shield is a driver module for motors that allows you to use Arduino to control the working speed and direction of the motor. Based on the Dual Full-Bridge Drive Chip L298, it is able to drive two DC motors or a step motor. The Motor Shield can either be powered directly by Arduino or by an external 5V~15V power supply via the DC jack. This module can be used for the development of micro robots and intelligent vehicles, etc.   Note: Headers of this product is shipped unsoldered.   Feature Arduino/Seeeduino compatible Standardized shape design LED enable indicator LED rotation direction indicator Overcurrent turn-off   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • MP3 player shield

    MP3 player shield

    Excl. Tax: € 29,00 Incl. Tax: € 35,09
    Description: This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield still utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis. The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header. This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the 6 and 8-pin stackable headers. Note: Please refer to the Line Out document below for important information regarding connecting this shield directly to an amplifier. Features: 3.5mm audio out jack 0.1" spaced header for speaker out microSD card slot Documents: Schematic Eagle Files Datasheet (VS1053B) Quickstart Guide MP3 Player Example Code Line Out Information Sample MP3 Files MP3 Player Control Example MP3 Decoding Example Sketch Saber más
  • Music Instrument Shield

    Music Instrument Shield

    Excl. Tax: € 22,50 Incl. Tax: € 27,23

    Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/pair of headphones to the 1/8" stereo jack on the shied and pass the proper serial commands to the IC and you'll be playing music in no time!

    The VS1053 contains two large tonebanks including various piano, woodwinds, brass, synth, SFX and percussion sounds. The shield is also capable of playing several tones simultaneously (maximum polyphony of up to 31 sounds!). Take a look at our example code to get an idea of how easy it is to add musical zest to your next Arduino gadget.

    In this version, we're using a better regulator, corrected the speaker connectors, and have the reset pin pulled high. We've also included solder jumpers for pin 3 and 4 so they're selectable.

    Documents:

    Saber más
  • Music Shield

    Music Shield

    Excl. Tax: € 24,00 Incl. Tax: € 29,04

    Características
    - Interfaz estándar para Arduino
    - Reproductor multimedia "MP3" usando VS1053b
    - 2 pulsadores de control y 1 interruptor
    - Reproduce musica desde tarjetas micro SD. Decodifica:MP3,WMA,WAV,MIDI,Ogg Vorbis,FLAC (con plugin para el software)
    - Interfaz I2S para DAC externo
    - Salida Auricular/Line Out para reproducción
    - Entrada Line In para grabación en formato OGG
    - Excelente calidad de sonido: alrededor de un rango dinámico de 90 dB para reproducción
    - Normativa RoHS

    Documentación
    - Datasheet
    - Source
    - Librería

    Saber más
  • Music Shield V2.0

    Music Shield V2.0

    Excl. Tax: € 27,05 Incl. Tax: € 32,73
    Time to build your real-time MIDI instrument/music player! The Music Shield is an audio encoder/decoder compatible with Arduino, Seeeduino, Seeeduino Mega and Arduino Mega. It is based on the VS1053B chip, which enabled it to play sound files from SD card and do short-time recording as well. You can also use it to play MIDI notes by slightly changing its hardware installations. Due to the SPI communication mode, it keeps a minimum number of IO port that facilitates users’ own developments of this device. Additionally, the new multifunction button provides greater convenience for users to control.   Note: Headers of this product is shipped unsoldered.   Features Compatible with Arduino,Seeeduino, Arduino Mega, and Seeeduino Mega New multifunction button Supported music format: MP3,WMA,WAV,AAC,MIDI,Ogg Vorbis Supports Micro SD card  3.5mm headphone jack MIDI interface breakout   High quality playback Low MIDI Latency   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • Mux Shield II

    Mux Shield II

    Excl. Tax: € 26,85 Incl. Tax: € 32,49
    Description: Sometimes you've got way too many inputs, or outputs... or both. How are you going to get them all connected to your Arduino? The Mux Shield, that's how. The Mux Shield II from Mayhew Labs is an upgrade on their previous Mux Shield which makes it possible to route up to 48 analog and digital inputs or digital outputs to and from your Arduino board.

    The Mux Shield II improves on the original by moving all of the I/O pins to the end of the board, thus allowing you to add one big connector and hook up a ribbon wire or similar cable solution. This also gets the pins out of the way so that the Mux Shield can be in the middle of a stack, with a shield on top of it, and you can still get to the I/O pins. The pins are arranged into three rows of sixteen and each row can be individually set as a digital input, a digital output or an analog input from the Arduino sketch! Further increasing the flexibility of the board, Mayhew Labs added solder jumpers to the bottom of the board that allow you to shut off this software control feature and "hard wire" the functionality of each row, freeing up the associated Arduino pins for other shields in the stack.

    The Mux Shield uses TI 74HC4067 analog multiplexers (muxs) for input functionality and TI 74HC595 shift registers for output functionality. Don't worry if that's jibberish to you, the included Arduino library wraps it up and makes it very easy-to-use.

    The shield comes without any headers so be sure to pick up some stackable shield headers!

    Replaces: DEV-09832

    Saber más
  • PoEthernet Shield

    PoEthernet Shield

    Excl. Tax: € 35,75 Incl. Tax: € 43,26
    Description: Ethernet connectivity is a great way to get your Arduino talking to other systems all over the world (or at least the network). But sometimes running an Ethernet cable is hard enough, why should you have to run a power cable too? That's where PoE comes into play: Power over Ethernet. The PoEthernet Shield not only give your Arduino access to the Internet via the Ethernet Library but it also allows your project to power itself from the Ethernet line (provided you've injected power to it somewhere down the line).

    The way this is accomplished is that the unused data pairs of the RJ-45 connector broken out to the 4-pin header in the corner of the shield. The 'V-' pin on that header breaks out the 7 8 pair of RJ-45 pins, and the 'V+' pin breaks out the 4 5 pair. You can use a couple of jumpers to connect those pins to 'GND' and 'VIN' respectively. This will send the PoE through the Arduino, to be regulated to 5 and 3.3V. This works really well with our passive PoE cable set! The shield also includes an SD card slot that can be accessed using the SD library.

    Note: This is not 802.3af-compatible PoE, it's more of a home-brew Power-over-Ethernet scheme that we like to call "DIY PoE." You shouldn't apply anything outside the 7-12V range to those pins (The input voltage range of the Arduino board) unless you regulate the power off-board.

    Documents:

    Saber más
  • Power Driver Shield Kit

    Power Driver Shield Kit

    Excl. Tax: € 15,50 Incl. Tax: € 18,76

    This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino. 

    The board provides 6 PWM outputs via screw terminals. Check the datasheet for the MOSFET below for full specifications on how much current this board can handle.This board is a very easy way to start using MOSFETS for your next high current project.

    A protection diode has been added to the power input of this version of the board.

    Note: If you want to stack another shield on top of this one, you will want to double-up on the stackable headers to clear the MOSFETs.

    Documents:

    

    Saber más
  • Power Shield

    Power Shield

    Excl. Tax: € 16,00 Incl. Tax: € 19,36

    Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and other non-standard components. With this shield, your Arduino now have one power supply for all.

    It has be build-in voltage measuring function which mapping the output voltage to Arduino analog pin 0. It can be controlled by Arduino digital Pin13 to switch on/off.

    Specification

    • Supply voltage:4.5-35V
    • Output voltage:1.25-12V 
    • Output current: 2A (3A peak)
    • Efficiency:90%

    Documents

    Saber más
  • Proto Screw Shield-Assembled (Arduino Compatible)

    Proto Screw Shield-Assembled (Arduino Compatible)

    Excl. Tax: € 10,00 Incl. Tax: € 12,10

    Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. 

    The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield.

    The prototyping shield provides a fast prototpying area for projects. It features a LED (D13) and two buttons (reset and general).

    Documents

    Saber más
  • Proto Screw Shield-unassembled (Arduino Compatible)

    Proto Screw Shield-unassembled (Arduino Compatible)

    Excl. Tax: € 12,60 Incl. Tax: € 15,25

    Introduction

    Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping.

    The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield.

    The prototyping shield provides a fast prototpying area for projects. It features a LED (D13) and two buttons (reset and general).

    In the case that you have a breadboard,the shield do not ship with breadboard. The best suitable breadboard isMini Bread Board Self Adhesive.

    Documents

    Shipping List

    • Proto Screw Shield-unassembled (1 unit)
    Saber más
  • ProtoScrewShield

    ProtoScrewShield

    Excl. Tax: € 10,00 Incl. Tax: € 12,10

    The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED.

    This product includes all the parts shown and comes in kit form and must be soldered together by the end user.

    Kit Includes:

    • 1x ScrewShield PCB
    • 1x 5mm Yellow LED
    • 1x 330Ω Resistor
    • 2x 6-pin Stackable Headers
    • 2x 8-pin Stackable Headers
    • 2x Momentary Push Buttons
    • 6x 2-pin 3.5mm Screw Terminals
    • 8x 3-pin 3.5mm Screw Terminals

    Documents:

    Saber más
  • ProtoShield for Arduino Pro Mini

    ProtoShield for Arduino Pro Mini

    Excl. Tax: € 3,00 Incl. Tax: € 3,63

    SPECIAL OFFER WHILE STOCKS LAST!!

    This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external circuitry, this might be a perfect addition. 38 unconnected PTHs are provided for your prototyping needs.

    The shield fits the small form factor of the Arduino Pro Mini - connecting to the 'top' four pins on each side of the Mini ('GND'-'TXO' & 'VCC'-'RAW'). There are small buses for VCC, GND and RAW. In addition to the power buses, the serial pins are also broken out on the shield. The analog and digital pins are not broken out on the shield.

    Features:

    • VCC, RAW and GND buses
    • Serial (RXI & TXO) pins broken out to small buses
    • Works with both 5V and 3.3V Pro Mini versions
    • Upholds the Pro Mini's small form factor
    • 38 unconnected PTHs for prototyping

    

    Saber más
  • Protoshield Kit for Arduino

    Protoshield Kit for Arduino

    Excl. Tax: € 10,15 Incl. Tax: € 12,28
    Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield. Saber más
  • Prototype Shield for Raspberry Pi

    Prototype Shield for Raspberry Pi

    Excl. Tax: € 12,15 Incl. Tax: € 14,70
    Prototype Shield for Raspberry Pi is a prototype board that you can combine your raspberry pi with other components, modules. As a prototype board, it also provides power and state indicator light. Besides, this product has a mini breadborad. Note: not include Raspberry Pi   Feature: SOP16 SMT 2 LED Indicator Including a Mini Breadboard.   Package Include? 1 x Prototype Shield Board 1 x Mini Breadboard Saber más
  • PWM Shield

    PWM Shield

    Excl. Tax: € 16,50 Incl. Tax: € 19,97
    Description: This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ground rails. Because the IC can be daisy-chained, output headers are broken out on one side of the shield and can be connected to our TLC5940 Breakout to further expand your PWM capabilities.

    Use this board to increase the number of PWM pins available to your microcontroller for applications such as monocolor, multicolor or full-color LED displays, LED signboards, display backlighting, servo control, or any other project where a large number of PWM drivers are necessary.

    Note: While each 3-pin PWM header is 0.1" spaced, the space between each header is slightly larger in order to accommodate servo connections. In order to make this board suitable for use with servos, 2.2k pull-up resistors have been included on each output as well. Finally, the 2.2k resistor on the Iref pin sets the output current to 17.8mA but a parallel through-hole connection is provided for an additional resistor to increase the current if necessary. To determine the resistor value you need for a given output check the equations provided on the schematic below.

    Documents:

    Saber más
  • Relay Shield

    Relay Shield

    Excl. Tax: € 18,00 Incl. Tax: € 21,78

    Relay Shield es un módulo con 4 relés que ofrecen un camino fácil para aplicaciones de control de baja y alta tensión. La potencia máxima de conmutación podrá ser DC90W o AC360VA. Podrá ser directamente controlado por Arduino a través de IOs digitales con un suministro externo de 9V. haciendo sencillo el uso en robótica, control industrial, domótica, etc.

    Documentación
    - Datasheet
    - Source file
    - Demo code

    Saber más
  • RFduino - CR2032 Coin Battery Shield

    RFduino - CR2032 Coin Battery Shield

    Excl. Tax: € 20,80 Incl. Tax: € 25,17
    This is the RFduino CR2032 Coin Battery Shield, a small add-on board for the RFduino DIP module that supplies 2-3V to your whole project. This shield can easily attach anywhere on your RFduino stack and will still be able to provide reliable power throughout your boards.The CR2032 Coin Battery Shield is also equipped with a power switch and, unlike the AAA Battery Shields, directly powers the RFduino without any regulation.Note: A CR2032 battery is NOT included with this shield but can be found in the Recommended Products section below.Features:Output Voltage: 2-3VOutput Current: 25mADocuments:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFduino - Dual AAA Battery Shield

    RFduino - Dual AAA Battery Shield

    Excl. Tax: € 26,55 Incl. Tax: € 32,13
    This is the RFduino Dual AAA Battery Shield, a long add-on board for the RFduino DIP module that supplies 3.3V to your whole project. This shield can easily attach anywhere on your RFduino stack and will still be able to provide reliable power throughout each board.The Dual AAA Battery Shield is also equipped with a power switch and a step-up switching regulator which allows the batteries to be drained down to low voltages while still providing a stable 3.3V to your RFduino.Note: AAA batteries are NOT included with this shield but can be found in the Recommended Products section below.Features:Output Voltage: 3.3VOutput Current: 100mADocuments:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFduino - MicroSD Shield

    RFduino - MicroSD Shield

    Excl. Tax: € 20,80 Incl. Tax: € 25,17
    This is the RFduino MicroSD Shield, a tiny add-on board that provides you with a means to read and write to microSD cards with your RFduino. This little shield allows you to be able to access gigabytes worth of external memory and removes one of the few drawbacks of the main RFduino board. Like the rest of the RFduino product line this shield can attach anywhere on your stack and still provide you with a reliable connection.The MicroSD Shield requires a supply voltage of 3.0-3.3V and has a max current draw of 100mA at its peak.Note: Due to this current draw be sure not to use the CR2032 Battery Shield with the MicroSD Shield attached.Features:Supply Voltage: 3.0-3.3VMax Current Draw: 100mA (peak)Documents:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFduino - PCB USB Shield

    RFduino - PCB USB Shield

    Excl. Tax: € 30,15 Incl. Tax: € 36,48
    This is the RFduino PCB USB Shield, a small add-on board that plugs into any USB port and is used to load your sketches onto an RFduino module. This shield is almost identical to the RFduino USB Shield and provides the same basic function. The PCB USB Shield can be attached to any solderless breadboard with the RFduino DIP plugged on top or even below it for better ease of use. Once your code is loaded onto the RFduino, this USB Shield can be detached!On-board the RFduino PCB USB Shield is a 3.3V regulator which can be used to supply power to the RFduino DIP module as well as other shields and possibly the rest of your circuit.Note: This board or the PCB Shield are required to load code onto your RFduino.Features:FT231XQ-R USB ControllerMax Current: 500mASerial Interface: RX, TX, RESETDocuments:SchematicDatasheetPCB Layout Saber más
  • RFduino - Proto Shield

    RFduino - Proto Shield

    Excl. Tax: € 12,20 Incl. Tax: € 14,76
    This is the RFduino Proto Shield, a finger-tip sized board that can be attached to the main RFduino Dip module to create your own custom circuits and prototypes. The Proto Shield provides access to the 3V supply rail and ground, in addition to a free grid area in the center for soldering your chosen circuits. This shield is great for combining your own creations with the rest of the RFduino line!Documents:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFduino - Relay Shield

    RFduino - Relay Shield

    Excl. Tax: € 34,45 Incl. Tax: € 41,68
    This is the RFduino Relay Shield, a beefy add-on board that allows your RFduino to control higher voltage and current loads through 2 relays. This shield provides great support of RFduino projects that require high power consumption or distribution. Like the rest of the RFduino product line this shield can attach anywhere on your stack and still provide you with a reliable connection.The Relay Shield provides two SPDT, independently controlled relays with a max voltage and current of 12VDC at 1A.Features:Max Voltage: 12VDCMax Current: 1A2 SPDT Relay OutputsDocuments:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFduino - RGB/Button Shield

    RFduino - RGB/Button Shield

    Excl. Tax: € 17,25 Incl. Tax: € 20,87
    This is the RGB/Button Shield for RFduino, a small add-on board for the RFduino DIP module. Just as its name suggests, this little board is equipped with two pushbuttons and an RGB LED. This shield can be easily attached above or below any other RFduino product and will work perfectly with the RFduino Colorwheel and RFduino LEDButton iOS apps (both found in the Documents section below).Both button inputs on the RGB/Button Shield offer 10k resistor pull downs. This shield, when used in conjunction with the RFduino DIP and USB Shield boards can create a very easy project for beginners!Documents:SchematicDatasheetPCB LayoutiOS AppsProduct Video Saber más
  • RFduino - Servo Shield

    RFduino - Servo Shield

    Excl. Tax: € 20,80 Incl. Tax: € 25,17
    This is the RFduino Servo Shield, a small board that can be used with the RFduino DIP module to drive up to 4 servos at once. This pretty much as small as servo controllers get even when attached to the RFduino DIP board. With this shield and the RFduino Servo iOS app you will actually be able to wirelessly control your servos!This shield does require that you supply it with 5-6VDC power for the servos, this does not include the 3V needed to operate the RFduino interface.Features:Input Voltage: 6VDC Max4 Servo OutputsDocuments:SchematicDatasheetPCB LayoutiOS AppsProduct Video Saber más
  • RFduino - Single AAA Battery Shield

    RFduino - Single AAA Battery Shield

    Excl. Tax: € 26,55 Incl. Tax: € 32,13
    This is the RFduino Single AAA Battery Shield, a long add-on board for the RFduino DIP module that supplies 3.3V to your whole project. This shield can easily attach anywhere on your RFduino stack and will still be able to provide reliable power throughout each board.The Single AAA Battery Shield is also equipped with a power switch and a step-up switching regulator which allows the 1.5V battery to be drained down to low voltages while still providing a stable 3.3V to your RFduino.Note: AAA batteries are NOT included with this shield but can be found in the Recommended Products section below.Features:Output Voltage: 3.3VOutput Current: 40mADocuments:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFduino - USB Shield

    RFduino - USB Shield

    Excl. Tax: € 31,55 Incl. Tax: € 38,18
    This is the RFduino USB shield, a small add-on board that plugs into any USB port and is used to load your sketches onto an RFduino module. This shield can also be attached to any solderless breadboard with the RFduino DIP plugged on top or even below it for better ease of use. Once your code is loaded onto the RFduino, this USB Shield can be detached!On-board the RFduino USB Shield is a 3.3V regulator which can be used to supply power to the RFduino DIP module as well as other shields and possibly the rest of your circuit.Note: This shield is required to load code onto your RFduino.Features:FT231XQ-R USB ControllerMax Current: 500mASerial Interface: RX, TX, RESETDocuments:SchematicDatasheetPCB LayoutProduct Video Saber más
  • RFID Evaluation Shield - 13.56MHz

    RFID Evaluation Shield - 13.56MHz

    Excl. Tax: € 16,30 Incl. Tax: € 19,72
    Description: This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure to check the schematic for information on the connections.

    The XBee header is designed to be used with the XBee Explorer Regulated board.

    This board comes populated with the switches, resistors and LEDs, but does not include the RFID module, XBee or Arduino board.

    Documents:

    Replaces: DEV-10162

    Saber más
  • RFM22 Shield

    RFM22 Shield

    Excl. Tax: € 24,45 Incl. Tax: € 29,58
    Description: The RFM22 is a low-cost ISM FSK transceiver module which offers communication at 433MHz ISM and adjustable output power of up to +20 dBm. What does that mean for you? It means your Arduino now has an inexpensive way to talk to other Arduinos so building point-to-point and even basic mesh networks just got a lot more attractive.

    The RFM22 Shield connects the RFM22 module to the appropriate lines on the Arduino. By using the RF22 Library, you can send and receive messages via standard 4-wire SPI. The library includes command structures for setting up anything from simple non-addressed point-to-point communication to fully addressed networks of clients and routers. The shield also provides a through-hole antenna connection for hooking up a basic wire antenna. In our testing, a 17cm wire attached to the 'ANT' pin worked just fine. A hole is drilled next to the 'ANT' pin for strain relief.

    The shield has on-board power regulation and level shifting. There are one pin headers and jumpers on the interrupt (nIRQ), interface select (nSEL), shutdown input (SDN) and GPIO2 lines so that you can cut the trace and reroute those lines if you need to for your project. The board also provides a little bit of prototyping space.

    Features:

    • Frequency Range = Software configurable from ~240MHz to 980MHz
    • Sensitivity = -118 dBm
    • +17 dBm Max Output Power (Configurable)
    • Data Rate = 1 to 128 kbps
    • Digital RSSI
    • Wake-on-radio
    • Configurable packet structure
    • Preamble detector
    • TX and RX 64 byte FIFOs
    • Low battery detector
    • Temperature sensor and 8-bit ADC
    • -40 to +85 C temperature range

    Documents:

    Saber más
  • Robotics Shield Kit for Arduino - Parallax

    Robotics Shield Kit for Arduino - Parallax

    Excl. Tax: € 133,90 Incl. Tax: € 162,02
    Description:Make your Arduino the onboard brain of a mobile robot and learn robotics, electronics, and programming with this versatile kit and its accompanying step-by-step lessons. The Board of Education Shield plugs into your own Arduino (not included) and mounts on the popular Boe-Bot robot chassis. This kit includes everything you need (except for an Arduino) to get started learning about robotics!

    With this kit and your own Arduino module, you can follow the Robotics with the Board of Education Shield for Arduino lessons with over 40 hands-on activities, such as:

    • Learning to program your robot's Arduino Brain
    • Calibrating the robot's continuous rotation servo motors
    • Using lights and speakers for status indicators
    • Assembling the robot
    • Preprogrammed navigation
    • Using touch-switches to navigate by contact with objects
    • Using phototransistors to navigate by light
    • Using non-contact infrared sensors to measure distance and avoid or follow objects

    Includes:

    • Board of Education Shield
    • Aluminum Chassis
    • 2x Servos
    • 2x Wheels
    • Hardware Kit
    • Electronic Components
    • Screwdriver

    Documents:

    Saber más
  • RS485 Shield V2

    RS485 Shield V2

    Excl. Tax: € 14,35 Incl. Tax: € 17,36
    Our friends over at LinkSprite have made this nifty little RS485 Shield, now you will be able to have a communication port for your field bus directly connected to your Arduino! Even though the RS485 is sometimes thought as an “archaic” protocol, it will allow up to 32 devices to communicate through the same data line over a cable length of up to 4000ft with a maximum data rate of 10Mbit/s. Those aren’t bad numbers!This version of the RS485 shield removes the optional DB9 connector bay and adds a second 2-pin screw terminal and the ability to choose two pins from your Arduino’s D0 to D7 as Software Serial Ports to communicate with the shield.This shield does come without its headers separate so a small amount of soldering will be required before attaching it to your Arduino device.Documents:SchematicDatasheet (MAX481CSA)RS485 Shield V2 TutorialProduct Wiki Saber más
  • Screw Shield

    Screw Shield

    Excl. Tax: € 8,80 Incl. Tax: € 10,65
    Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks.  On the digital pins side, it contains 18 terminals: 16 normal terminals and 2 extra GND.  As to the Analog pins side, there are 16 terminals (12 normal terminals, 4 extra terminals for Vin, 2*GND and 5V) and 2 breakout through holes for 2 additional ADC pins. Sweetly, a special extension block for SPI interface is included in this product to make it a truly stackable shield for other shields like TFT touch screen to mount on. FeaturesArduino and Seeeduino compatibleExtra ADC though holes and SPI extension interfaceTruly stackable Saber más
  • SD Card Shield V4

    SD Card Shield V4

    Excl. Tax: € 9,00 Incl. Tax: € 10,89

    This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous versions, it combines the standard SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitate your connection with Grove modules.
     
    Note: Headers of this product is shipped unsoldered.
     
    Features
    • Stand SD card、SDHC card and TF card compatible
    • UART Grove & I2C connection compatible
    • Fully supported SD Library
    • Minimal number of SPI port
    • Truly stackable
    Specification
     

    Item

    Min

    Typical

    Max

    Unit

    Voltage

    3.5

    5.0

    5.5

    V

    Current

    0.159

    100

    200

    mA

    Supported Card Type

    SD card(<=32G); Micro SD card(<=32G); SDHC card(<=32G)

    /

    Dimension

    68.7x53.5x19.00

    mm

    Net Weight

    14.8

    g

     

     

     

    Saber más
  • SD Card Shield V4

    SD Card Shield V4

    Excl. Tax: € 11,30 Incl. Tax: € 13,67
    This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous versions, it combines the standard SD slot and the Micro SD slot into a standard one, the included adaptor enables using of Micro SD cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitate your connection with Grove modules.   Note: Headers of this product is shipped unsoldered.   Features Stand SD card?SDHC card and TF card compatible UART Grove & I2C connection compatible Fully supported SD Library Minimal number of SPI port Truly stackable Specification   Item Min Typical Max Unit Voltage 3.5 5.0 5.5 V Current 0.159 100 200 mA Supported Card Type SD card(<=32G); Micro SD card(<=32G); SDHC card(<=32G) / Dimension 68.7x53.5x19.00 mm Net Weight 14.8 g     Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • Seeed BLE Shield

    Seeed BLE Shield

    Excl. Tax: € 24,75 Incl. Tax: € 29,95
    This Seeed BLE Shield utilizes an HM-11 module to provide your Arduino/Seeeduino with serial BLE function. It only takes two pins of the micro controller to communicate your device with this shield. With support for a BLE ComAssistant APK, this BLE Shield can talk to your mobile phone more easily without pairing. You can use it in many conditions, like robot controls or remote control equipment ,etc. We prepared an easy and convenient command set for this shield so that you can use neat and concise code to run the function.   Features: Arduino/Seeeduino compatible UART serial port of HM-11 on the Shield can be connected to Arduino by jumpers With two Grove connectors, making it easy to connect I2C and digital IO Grove modules to Arduino AT commands support   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • Seeeduino Mega Protoshield Kit

    Seeeduino Mega Protoshield Kit

    Excl. Tax: € 9,35 Incl. Tax: € 11,31
    With this protoshield, users will find a large prototyping area, you can even use Xbee with this board to make it a Xbee shield. Saber más
  • Shield - MEGA Proto KIT

    Shield - MEGA Proto KIT

    Excl. Tax: € 11,50 Incl. Tax: € 13,92

    Base kit to extend your Arduino MEGA with your own wired circuit.

    The kit is composed from:
    1 MEGA Proto shield bare PCB
    1 40 way male 0.1" strip with long terminals
    1 18x2 way male 0.1" strip
    2 pushbuttons
    5 220 Ohm resistors
    5 1K Ohm resistors
    5 10K Ohm resistors
    3 LEDs

    Arduino MEGA Board not included

    Saber más
  • Shield - Wireless SD Shield

    Shield - Wireless SD Shield

    Excl. Tax: € 23,60 Incl. Tax: € 28,56

    Arduino shield with a socket for wireless modules like Digi Xbee, Bluetooth, RFID or Wifi Modules. Built in 3.3V voltage regulator, active voltage translators and prototyping area

    It comes with a microSD socket you can use with SD library to save and load data. If it is used, CS pin won't be available (used by library). It also includes a switch to select how to communicate with the module (USB/Board) instead of jumpers.

    Documentation:

    Saber más
  • Shield - Wireless Shield

    Shield - Wireless Shield

    Excl. Tax: € 17,00 Incl. Tax: € 20,57

    Arduino shield with a socket for wireless modules like Digi Xbee, Bluetooth, RFID or Wifi Modules. Built in 3.3V voltage regulator, active voltage translators and prototyping area

    It includes a switch to select how to communicate with the module (USB/Board) instead of jumpers.

    This shield doesn't have the SD socket.

    Documentation:

    Saber más
  • Shield Bot

    Shield Bot

    Excl. Tax: € 73,00 Incl. Tax: € 88,33
        Compared with the previous version, The Shield Bot V1.1 can use the usb port of PC to charge battery. And the charging efficiency is greatly improved after we optimize the circuit. And you can use the Arduino/Seeeduino Vin pin to fast charge.   Note: Compatible Arduino Board not included, try the Seeeduino.   Charge mode and charge efficiency as the following table:   Mode  Charge Current(A) the input power(W)  Charge power(W) Charge Efficiency(%) Charge time(h) USB Charge 0.396 3.94 3.56 90.36 2.50 Vin Charge 0.7 6.78 6.30 92.92 1.41   Features Easy to start - The Shieldbot is plug and play and can be running out of the box in minutes Expandable for imagination - solderless grove expansion ports enable easy attachment of more sensors and actuators, and shield headers allow the use of additional Arduino shields Open source - Its designed to be hacked, adapted and transformed into whatever you want it to be! Arduino Based - the Shieldbot is an Arduino shield, so the extensive Arduino community and shield ecosystem can be used for endless expansion! Charging efficiency - Can quickly fully charged, And has a high efficienty.   Specifications 5x IR reflectance sensors for line and edge following 900 mAh Li-ion rechargeable battery Two durable 160:1 micro metal gearmotors 6x Grove expansion ports Stackable shield headers   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum. Saber más
  • Shield Shield for Spark Core

    Shield Shield for Spark Core

    Excl. Tax: € 29,25 Incl. Tax: € 35,39
    The Spark Core is an Arduino-compatible, Wi-Fi enabled, cloud-powered development platform that makes creating internet-connected hardware a breeze.    This shield is essentially an adapter that allows the user to connect Arduino compatible shields to the Spark Core. There are two functions that this shield performs: pin mapping of the Spark Core to the Arduino pin layout and voltage translation of 3.3V to/from 5V.       We use Texas Instruments TXB0108PWR to do the voltage translation in between Spark Core’s 3.3V logic level and Arduino’s 5V logic.   Due to the limited number of pin to function combinations, we have only mapped three analog channels A0, A1 and A2. Unlike other IO pins, the analog pins are rated at only a max of 3.3V and NOT 5.0V. Please remember NOT to exceed this voltage at anytime.   The shield has an onboard voltage regulator and can be powered from 7V to 15V DC. You could also power it via the USB plug on the Spark Core alone but the current would be limited to 500mA.   The pictures shows a robot shield interfaced with the Spark Core via the Shield Shield.     Specifications Operating voltage: 7 to 15V DC Current consumption: without the core plugged in 7mA at 9V DC and 150mA with the Core.  Dimensions: 3.79” x 2.1” Weight: 40g   Pin Mapping IMPORTANT: The Shield Shield does not map the Spark Core pins to like-numbered pins on the Arduino. In other words, D0 on the Spark Core is not the same as D0 on the Arduino. Please review the pin mapping table to the right and plan accordingly.   Arduino pin Spark Core pin Peripherals 0 RX   1 TX   2 D2   3 D0 PWM (analogWrite) 4 D3   5 D1 PWM (analogWrite) 6 A7 PWM (analogWrite) 7 D4   8 D5   9 D6   10 A2 SS 11 A5 PWM (analogWrite) / MOSI 12 A4 PWM (analogWrite) / MISO 13 A3 SCK A0 A0 analogRead (ADC, 3.3V) A1 A1 analogRead (ADC, 3.3V) A2 A6 analo Saber más
  • Small e-paper Shield

    Small e-paper Shield

    Excl. Tax: € 24,60 Incl. Tax: € 29,77
    e-paper might be the most comfortable material to read. It reflects light instead of emits light to mimic the experience of conventional paper reading. And in this way much less power is consumed. Small e-paper shield is a driver shield for e-paper of small sizes. It's capable of driving e-papers of 1.44 inch, 2.0 inch and 2.7 inch and supports more than 170 langusges. The upper surface of this shield is left flat and clean to give great support to the e-paper attached to it. If you are considering a lightweight and comfortable to read display, e-paper would be a good choice.   Attention: Since this driver board supports e-papers of different sizes. e-paper is not included in this product. We have e-paper of 2.0 inch and 2.7 inch on sale simultaneously. Go and add the most suitable one to your cart now!     Specifications Operating Voltage: 3.3/5VDC  Operating Current(refresh screen):40mA  Interface Type: SPI    Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • Solar Charger Shield V2

    Solar Charger Shield V2

    Excl. Tax: € 12,60 Incl. Tax: € 15,25
    The solar charger is a stackable shield to Arduino compatible platforms, enables adaptive battery power and act as energy harvester for in-field charging. Saber más
  • SparkFun GPS Shield

    SparkFun GPS Shield

    Excl. Tax: € 12,20 Incl. Tax: € 14,76
    Description: Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch (check below), you will be able to locate your exact position within a few meters. GPS also gives you amazingly accurate time!

    A connector for the popular EM-406 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not included and can be found below in the related items). There is also a spot for the UP501 GPS module. The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1" pitch header, and a small protoyping area is also provided.

    The DLINE/UART switch switches the GPS module's input/output between Arduino's standard TX/RX pins or any digital pins on the Arduino (default setting uses pins 3 and 2 connected to TX and RX, respectively). The DLINE/UART switch must be set to DLINE in order to upload code through the Arduino IDE.

    The shield also includes the footprint for a 12mm coin cell battery holder to provide battery backup to the optional EB-85A GPS module.An ON/OFF switch is included which controls power to the GPS module. Additionally, the Arduino reset switch is also brought out.

    Note: GPS modules are not included with the GPS Shield, and only the EM-406 connector is populated. Headers are also not installed or included, we recommend the 6 and 8-pin stackable headers.

    Features:

    • EM-406 connector populated
    • EM-408 and EB-85A connector footprints provided and connected for optional use
    • UP501 connector and footprint
    • Coin cell battery socket footprint provided and connected for optional battery backup of EB-85A GPS module
    • Standard Arduino sized shield
    • Prototyping area
    • GPS serial and PPS signals broken out to a 0.1" header for additional device connections
    • Arduino reset button
    • DLINE/UART switch controls serial communications
    • ON/OFF switch controls power to GPS module

    Documents:

    Replaces: GPS-09487

    Saber más
  • SparkFun GPS Shield Kit

    SparkFun GPS Shield Kit

    Excl. Tax: € 57,35 Incl. Tax: € 69,39
    This is the SparkFun GPS Shield Kit, a great launch pad for anyone looking to get into the world of GPS. This little kit includes our GPS Shield, an EM-506 GPS Receiver with interface cable, and a set of R3 headers to solder onto the shield. Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch (check below), you will be able to locate your exact position within a few meters. Here’s where we are. GPS also gives you amazingly accurate time! A connector for the popular EM-506 GPS receiver is populated on the board, and footprints for EM-408 and EB-85A connectors are also made available (connectors are not included and can be found below in the related items). The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1" pitch header, and a small prototyping area is also provided. The DLINE/UART switch switches the GPS module’s input/output between Arduino’s standard TX/RX pins or any digital pins on the Arduino (default setting uses pins 3 and 2 connected to TX and RX, respectively). The DLINE/UART switch must be set to DLINE in order to upload code through the Arduino IDE. The shield also includes the footprint for a 12mm coin cell battery holder to provide battery backup to the optional EB-85A GPS module.An ON/OFF switch is included which controls power to the GPS module. Additionally, the Arduino reset switch is also brought out.Includes:1x GPS Shield1x EM-506 GPS Module1x Arduino Stackable Header Kit - R3Features:EM-506 connector populatedEM-408 and EB-85A connector footprints provided and connected for optional useUP501 connector and footprintCoin cell battery socket footprint provided and connected for optional battery backup of EB-85A GPS moduleStandard Arduino sized shieldPrototyping areaGPS serial and PPS signals broken out to a 0.1" header for additional device connectionsArduino reset buttonDLINE/UART switch controls serial Saber más
  • Sparkfun microSD Shield

    Sparkfun microSD Shield

    Excl. Tax: € 12,20 Incl. Tax: € 14,76
    Update: After taking a figurative lashing from the comments section we're begging for mercy by updating the microSD Shield board. All new microSD shields have a voltage converter chip on-board that converts the Arduino 5V signals to 3.3V signals in accordance with SD specifications. No more 'blown up' SD cards!

    Description: Running out of memory space in your Arduino project? The microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. A microSD quickstart guide is available!

    Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the microSD socket are broken out to the ATmega168/328's standard SPI pins (digital 11-13), while the CS pin is broken out to Arduino's D8 pin. If you decide to use one of the many open source FAT libraries (like FAT16 or SDFat) make sure to change the code to reflect the location of the CS pin. Most libraries assume the CS pin is connected to D10; this will have to be changed to D8. Also for the libraries to work pin D10 will have to be set as an output in the 'setup()' section of your sketch. The shield also includes a large prototyping area with a 13x12 grid of 0.1" pitch PTHs.

    This shield comes populated with a microSD socket, red power indicator LED, and a reset button; but it does not come with headers installed. We recommend the 6 and 8-pin stackable headers.

    Documents:

    Saber más
  • SparkFun OpenSegment Shield

    SparkFun OpenSegment Shield

    Excl. Tax: € 14,35 Incl. Tax: € 17,36
    We love 7-segment displays and we know you do too, so we have made the easiest (arguably) to use medium for you to get up and running and use! This SparkFun OpenSegment Shield was specifically designed to run on top of most Arduino Uno compatible boards, all you need to do is attach headers and your choice of 7-segment display to the shield and snap it in, no bread boards required. The OpenSegment Shield can combine a classic 4-digit 7-segment display and an ATMega328 microcontroller allowing you to control every segment individually using only a few serial lines. Just like our other 7-segment boards, the OpenSegment Shield can be controlled in one of three ways: Serial TTL communication, SPI serial communication or I2C serial. This shield is very similar to our other OpenSegment Displays, the biggest benefit to this board is its ease of use thanks to the Arduino Uno form factor. Note: This does NOT include a 7-segment display. We’ve removed the display itself to give you a chance to choose a specific color. Check the Recommended Products section below for different options.Features:4 digit alpha-numeric display area with Serial Comm, SPI or I2C Serial InterfaceDisplay numbers, many letters, and a few special charactersIndividual control of decimal pointsSelectable baud rateSelectable brightnessBaud rate and brightness values retained in non-volatile memoryIndividual segment control for each digitArduino Uno Form FactorDocuments:SchematicEagle FilesDatasheet (ATmega328)Hookup GuideArduino Add-OnSerial 7 Segment Display FirmwareGitHub Saber más
  • SparkFun Vernier Interface Shield

    SparkFun Vernier Interface Shield

    Excl. Tax: € 21,55 Incl. Tax: € 26,08
    This is the SparkFun Vernier Interface Shield, a simple add-on to give your Arduino the capability to interface with Vernier sensors. Attached to this interface shield are four British Telecom sockets (2 Analog, 2 Digital) which all Vernier sensors use as connectors. Like any other shield, simply attach it to an Arduino development platform. This shield was developed to be used with the Arduino Uno platform but will still work with other Uno equivalents like the Leonardo or SparkFun RedBoard. Vernier Software and Technology has been a leader in data collection and analysis for educators world-wide. They were amongst the first companies to design and promote the use of computers, sensors, and data collection in K-12 classroom laboratory experiments. https://www.youtube.com/watch?v=sRws6_Hxrh8 Documents:SchematicEagle FilesArduino and Vernier SensorsHookup GuideGitHub Saber más
  • Static Shielding Bag - 3" x 5"

    Static Shielding Bag - 3" x 5"

    Excl. Tax: € 0,45 Incl. Tax: € 0,54
    Description: You probably recognize these StratoGrey static shielding bags. Not only do we use them to protect our more sensitive components during shipping, but they're fairly ubiquitous in the electronics world. Their buried metal construction provides Faraday Cage protection meeting electrostatic requirements of MIL B-81705 Type 3 (One of you probably knows what that means). Also, they're heat-sealable for dust and moisture resistance! These are great for shipping sensitive devices or just storing them in your shop.

    Dimensions: 3 x 5"

    Features:

    • Faraday Cage protection
    • 3/8" Mil-spec seal
    • Meets electrostatic requirements of MIL B-81705 Type 3
    • Superior ESD shielding -greater than 99% attenuation
    • Superior EMI shielding - greater than 45 dB in the 1-10 GHz range
    • MTVR less than 0.02gms in testing conditions (100F/90% R.H.)

    Documents:

    Saber más
  • Static Shielding Bag - 4" x 6"

    Static Shielding Bag - 4" x 6"

    Excl. Tax: € 0,45 Incl. Tax: € 0,54
    Description: You probably recognize these StratoGrey static shielding bags. Not only do we use them to protect our more sensitive components during shipping, but they're fairly ubiquitous in the electronics world. Their buried metal construction provides Faraday Cage protection meeting electrostatic requirements of MIL B-81705 Type 3 (One of you probably knows what that means). Also, they're heat-sealable for dust and moisture resistance! These are great for shipping sensitive devices or just storing them in your shop.

    Dimensions: 4 x 6"

    Features:

    • Faraday Cage protection
    • 3/8" Mil-spec seal
    • Meets electrostatic requirements of MIL B-81705 Type 3
    • Superior ESD shielding -greater than 99% attenuation
    • Superior EMI shielding - greater than 45 dB in the 1-10 GHz range
    • MTVR less than 0.02gms in testing conditions (100F/90% R.H.)

    Documents:

    Saber más
  • Touch Shield

    Touch Shield

    Excl. Tax: € 11,50 Incl. Tax: € 13,92

    The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the remaining 3 electrode connections. With this shield you can have a total of 12 touch sensitive buttons. An on-board logic level converter allows it to work with 5V and 3.3V Arduino boards. Simply solder on some header pins and stack it on to your Arduino for a convenient input device. Check below for some example code to get you started.

    Documents:

    

    Saber más
  • TransmogriShield

    TransmogriShield

    Excl. Tax: € 11,25 Incl. Tax: € 13,61
    Description: The Arduino Leonardo arrived on the scene to great applause. This was followed by the creeping realization that, because of the new microcontroller, all of our favorite SPI or I2C-based Arduino shields would be incompatible.

    Fear not, the TransmogriShield will transform your beloved classic shields into Leonardo-compatible shields (apparently "in a surprising or magical manner"? Really? Transmogrify?) By using an arrangement of surface-mount headers to "intercept" the incoming pins and shift them around, the TransmogriShield takes the SPI and I2C lines from their new, less convenient, homes at the ICSP header and D2/3 pins, and moves them back into classic Arduino position: SPI on D11-13 and I2C on A4/A5. Any shield placed above the TransmogriShield in the stack will "see" those lines in their old positions. If you can't work around the weird wiring in firmware, this shield might be a good quick-fix.

    Along with allowing you to use classic SPI/I2C based shields like the RF22 Shield, the Touch Shield or the SD Shield, the TransmogriShield also provides plenty of prototyping space, so it makes a pretty good protoshield for the Leonardo!

    Documents:

    Saber más
  • UNO Compatible Pogobed Kit for Shield Development

    UNO Compatible Pogobed Kit for Shield Development

    Excl. Tax: € 43,70 Incl. Tax: € 52,88
    Description: We know what you're thinking: "That is awesome... what is it?" This is an Arduino shield with pogo pin connectors for each and every GPIO. It's essentially the same rig we use to develop and test shields here at SparkFun! The pogo pins allow you to connect an Arduino shield to the dev board without having to make any solder connections: simply connect the Pogobed Shield to your Arduino, place the test shield on the pins and twist the tabs to lock in the flavor.

    Kit Includes:

    • Pogobed PCB
    • Pogobed Support Pieces
    • 30 x Pointed Tip Pogo Pins
    • 6 x Round Nylon Standoffs
    • 12 x Metal Hex Standoffs
    • 6 x 1/4" 4-40 Screws
    • 2 x 3/4" 4-40 Screws
    • 10k Resistor
    • 40-pin Male Breakaway Header
    • Green LED
    • Momentary Push Button
    Saber más
  • USB Host Shield

    USB Host Shield

    Excl. Tax: € 25,00 Incl. Tax: € 30,25

    This new version corrects the pin out for the GPX and RESET pins. The USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB slave device - thumbdrives, digital cameras, bluetooth dongles, and much more!

    A four-wire serial interface is used to communicate with the host controller chip, so the shield connects the Arduino's hardware SPI pins (D10-13) to the MAX3421E. A USB type A female connector is wired up to the IC, and it also supplies 5V as any normal USB port would.

    The Host Shield takes its power from the 'Vin' pin on your Arduino. Power from that pin is regulated to both 5V and 3.3V on the shield. All SPI signals are sent through a hex converter to step them down to 3.3V.

    Documents:

    Replaces: DEV-09628

    

    Saber más
  • Video Game Shield Kit

    Video Game Shield Kit

    Excl. Tax: € 28,70 Incl. Tax: € 34,73

    The Video Game Shield is an Arduino add-on shield to make your own video games, including graphics, text, sound effects, and music! Using the power of open source, this shield includes everything you need to make awesome black-and-white video games on your TV. It supports up to two Nintendo Wii Nunchuck controllers for an easy and familiar interface.

    Saber más
  • Video Overlay Shield

    Video Overlay Shield

    Excl. Tax: € 50,90 Incl. Tax: € 61,59

    The Arduino compatible shield board overlays text on analog video, using the Maxim MAX7456 on-screen display chip. This board allows easy overlay of text onto an analog video signal, NTSC or PAL. Connect this board to your favorite Arduino processor board to get started.

    Saber más
  • VoiceBox Shield

    VoiceBox Shield

    Excl. Tax: € 32,60 Incl. Tax: € 39,45
    Description: The VoiceBox Shield can be mounted on top of your Arduino board to give it access to all of the capabilities of the SpeakJet voice and sound synthesizer. The Voice Box Shield uses the SpeakJet chip to convert serial commands into a great robot-sounding voice.

    Populated on the VoiceBox Shield are the SpeakJet IC, a two stage audio amplifier with a potentiometer to set the gain and a standard 3.5mm audio output jack. Simply connect a speaker to the output jack and get your Arduino-bot talking with very minimal work!

    You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet's serial input.

    Also included on the shield are a grid of 0.1" pitch through-holes for prototyping as well as the Arduino's reset button. Headers are not included, we recommend the 6 and 8-pin stackable headers.

    Replaces: DEV-09799

    Saber más
  • W5200 Ethernet Shield

    W5200 Ethernet Shield

    Excl. Tax: € 30,65 Incl. Tax: € 37,09
    Your Ethernet Shield gets a total renewal now! This shield provides you instant Internet connectivity with a high spec Ethernet controller, W5200, with twice the buffer size of v1.0 and support for up to eight simultaneous TCP/UDP connections. An included SD slot enables applications that require storing large amounts of data, like IoT data logging. Thanks to a lowered RJ45 pot, you can flexibly add most of shields on top of this Ethernet Shield.   Note: Headers of this product is shipped unsoldered.   Features High speed Ethernet controller W5200 SPI interface 32 Kbytes inner buffer Minimal RJ45 Ethernet port Support up to eight simultaneous TCP/UDP connections Handy SD card function Grove ports for I2C and UART preformed   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum. Saber más
  • Wifi Shield

    Wifi Shield

    Excl. Tax: € 64,00 Incl. Tax: € 77,44

    This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals.

    Saber más
  • WiFly Shield

    WiFly Shield

    Excl. Tax: € 98,45 Incl. Tax: € 119,12
    Description: This new version breaks out the PI09, FORCE WAKE, and the hardware reset lines. It also has a different crystal and uses the RN-131C.

    The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network's RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and to free up the Arduino's UART.

    Power is taken from the Vin pin of your Arduino, regulated to 3.3V, and provided to both the RN-131C and the SC16IS750. You'll communicate with the WiFly Shield over SPI using Arduino digital pins 10-13 (CS, MOSI, MISO, SCLK respectively).

    The shield includes the RN-131C, SC16IS750 and their supporting components. The shield also provides a small prototyping area, with 0.1" spaced holes. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.

    Replaces: WRL-09367

    Saber más
  • Wixel Shield for Arduino

    Wixel Shield for Arduino

    Excl. Tax: € 13,50 Incl. Tax: € 16,34
    Description: This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless programming, debugging, and control using standard Arduino software. Wixel developers can also use this item as a Wixel prototyping board.

    The Wixel shield seamlessly enables a wireless link (with a typical range of ~50feet) to duplicate the functionality of your Arduinos USB interface, which means you can use the standard Arduino computer software to wirelessly program the Arduino, wirelessly debug sketches with the Arduino serial monitor and wirelessly communicate with the Arduino from your computers virtual COM port.

    More generally, the shield can also be used for wireless communication between an Arduino or Arduino clone and other embedded systems (including additional Arduinos). Alternatively, this board can also be used without an Arduino as a general-purpose Wixel prototyping board.

    Documents:

    Saber más
  • Wiznet Ethernet shield -w5100

    Wiznet Ethernet shield -w5100

    Excl. Tax: € 28,00 Incl. Tax: € 33,88

    This is a Ethernet shield based on the Wiznet W5100 ethernet chip,compatible with Arduino Ethernet Shield,added support to Arduino Mega.

    If you are going to use this shield with Arduino Mega, please download and copy this file to?
    arduino-0017|hardware|libraries|Ethernet|utility
    and overwrite the original file.
    Saber más
  • XBee Shield V2.0

    XBee Shield V2.0

    Excl. Tax: € 10,25 Incl. Tax: € 12,40
    The new version of XBee Shield is a standardized and stackable shield compatible with Arduino. You can easily stack any modules from the Bee series onto it, and build a wireless network for your project. In spite of that, it is also equipped with function of level conversion, which enables a double-way conversion between high& low IO levels. The reserved digital pins facilitate users to select TX/RX port using jumper caps.   Note: Headers of this product is shipped unsoldered.   Feature Standardized shape design Can be configured by connecting UartSBee module to USB The DIN and DOUT pins can be connected with both UART and other digital pins?D2~D12? Enlarged space for your own development LED indicators   Documents Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.   Saber más
  • Yun Shield

    Yun Shield

    Excl. Tax: € 35,85 Incl. Tax: € 43,38
        Yun Shield is one of the most powerful shields for Arduino Board. Yun Shield is designed to solve the Internet connectivity and storage issue for Arduino Board.    Yun Shield runs Open Source OpenWrt system (Same system as runs in Arduino Yun) and it is fully compatible with Arduino IDE v1.5.4 or later. Yun Shield is the ideally choice for Arduino Projects which require various internet connections and more storage.    Basically, Yun Shield + Leonardo equally to the official Arduino Yun, but Yun Shield is more flexible because it can work with other Arduino board such as Uno, Duemilanove, Mega etc. And Yun Shield uses external wifi antenna which provides stability and possibility for various environments.     Features •Open source Linux (OpenWrt) inside •Low power consumption •Compatible with Arduino IDE 1.5.4 or later, user can program, debug or upload sketch to Arduino board via Arduino IDE. •Managed by Web GUI, SSH via LAN or WiFi •Software upgradable via network •Built-in web server •Support internet connection via LAN port, WiFi or 3G dongle. •Support USB flash to provide storage for Arduino projects. •Failsafe design provides robustly system. •Compatible with Arduino Leonardo, Uno , Duemilanove, Diecimila, Mega   Specifications •Processor: 400MHz, 24K MIPS •Flash: 16MBytes •RAM: 64MBytes •Power Input: 4.75v ~ 23v via Arduino VIN pin •1 x 10M/100M RJ45 connector •150M WiFi 802.11 b/g/n •External Antenna via I-Pex connector •1 x USB 2.0 host connector, used for USB storage or 3G connection •1 x Reset button •Compatible with 3.3v or 5v I/O Arduino.   Documents Quick Start Guide User Manual  Datasheet  Hardware Source  Software Source  Firmware Download Saber más
  • Grove - Mega Shield

    Grove - Mega Shield

    Excl. Tax: € 9,20 Incl. Tax: € 11,13
    Mega Shield is a extension board for Arduino Mega and Google ADK. We have standardized all the connectors into 4 pins(Signal 1,Singal 2,VCC and GND) 2mm connectors and keep some of the 3pin(Signal, VCC and GND ) 2.54mm headers for Servo and Electronic Bricks , which simplify the wiring of electronics projects. Saber más
  • zzzProtoshield Kit for Arduino

    zzzProtoshield Kit for Arduino

    Excl. Tax: € 9,50 Incl. Tax: € 11,50

    Why not a proto shield kit? Compensating the disadvantage of either Arduino, Adding more solder-bility to big foot components, convenient power lanes. Check it out:

        * 100mil Grid
        * Full pinout of Arduino
        * USB B type soldering hole
        * Free drill hole matrix of 32/50/80mil
        * Breadboard style strip
        * Uart pinout sets
        * I2C pinout sets
        * 5V/GND/3V3 power rail
        * Free button
        * Reset button pinout
        * Pin13 LED pinout
        * Jack hole for potienmeter, power jack and etc
        * Bread board compatible

    Saber más
  • 1A Motor Shield For Arduino

    1A Motor Shield For Arduino

    Excl. Tax: € 12,00 Incl. Tax: € 14,52

    This Motor shield  for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current. This shield can be directly mount onto standard Arduino Duemilanove and Arduino Mega.

    Specification

    • 2 way 7-12V motor drive 
    • Up to 1A current each way
    • Pin 5,6,7,8 are used to drive two DC motor 
    • Support PWM speed control 

    Documents

    Manual

    Saber más
  • 2A Motor Shield For Arduino

    2A Motor Shield For Arduino

    Excl. Tax: € 14,00 Incl. Tax: € 16,94

    This Arduino Motor shield uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanove and Arduino Mega.

    Specification

    • 2 way 7-12V motor drive 
    • Up to  2A current each way
    • Pin 5,6,7,8 are used to drive two DC motor 
    • Support PWM speed control 
    • Support PLL advance speed control

    Documents

    Saber más
  • CAN Bus Shield for Raspberry Pi

    CAN Bus Shield for Raspberry Pi

    Excl. Tax: € 75,00 Incl. Tax: € 90,75

    CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs). Each node is able to send and receive messages, but not simultaneously. A message consists primarily of an ID (identifier), which represents the priority of the message. A CAN message that is transmitted with highest priority will succeed and the node transmitting the lower priority message will sense this and back off and wait.

    The information is transmitted by two twisted wires that connect all system modules. It is transmitted by voltage difference between the two levels. The high voltage value represents 1 and low 0. Its combination forms an appropriate message.

    This kit includes:
    - CAN Bus Module for Arduino, Raspberry Pi and Intel Galileo
    - Raspberry Pi to Arduino Shields Connection Bridge

    You can also get the OBD-II cable separately.

    CAN Bus
    Standard ISO 11898
    Cabling Twisted pair
    Connector DB9
    Network Topology Multimaster
    Speed 125 to 1000 Kbps
    Signaling Differential
    Voltage Levels 0-5V
    Signals Half Duplex

    Documentation:
    Tutorial

    Note: Raspberry Pi not included. You can take a look on the new Starter Kits for Raspberry Pi, or buy it separately.

    Saber más
  • CAN-BUS Shield

    CAN-BUS Shield

    Excl. Tax: € 35,00 Incl. Tax: € 42,35

    This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBDII cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM406 GPS module. Making this shield ideal for data logging application.
    Features
    • CAN v2.0B upto 1 Mb/s
    • High speed SPI Interface (10 MHz)
    • Standard and extened data and remote frames
    • CAN connection via standard 9-way sub-D connector
    • 9-way sub-D standard OBDII connection cable
    • Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.
    • Socket for EM406 GPS module
    • Micro SD card holder
    • Connector for serial LCD
    • Reset button
    • Joystick control menu navigation control
    • Two LED indicator

    Documents:

    Saber más
  • Multiprotocol Radio Shield for Arduino, Raspberry Pi and Intel Galileo

    Multiprotocol Radio Shield for Arduino, Raspberry Pi and Intel Galileo

    Precio habitual: € 39,93

    Precio especial: Excl. Tax: € 29,70 Incl. Tax: € 35,94

    NOTE: This product is compatible with Arduino, Raspberry Pi and Intel Galileo boards. See below the links to each of the tutorials.

    The Multiprotocol Radio Shield is an interconnection shield for Arduino, and was designed to connect two communication modules at the same time. This that means a lot of possibilities and applications can be made using the cooking-hacks modules. The Multiprotocol Radio Shield includes the SPI bus connections that allows the use of the RS-485 and CAN Bus modules, but also is compatible with the rest of the cooking-hacks modules as RFID, XBee and Bluetooth.

    What can we do using this shield?:

    Documentation:
    Tutorial

    Saber más
  • Mega IO Expansion Shield For Arduino Mega V2.3

    Mega IO Expansion Shield For Arduino Mega V2.3

    Excl. Tax: € 20,00 Incl. Tax: € 24,20

    This is version 2.3 of the Mega IO Expansion shield. This shield is extra large and includes 3 Xbee slots, 1 microSD slot, Arduino shield headers to plugin most Arduino shields. It also includes a prototyping area and breakouts for Digital pins 14 to 53, Analog pins 6 to 15 and PWM pins 2 to 9. This shield can be a major communications hub for your projects.

    Features

    • support most of the arduino shield
    • compatible with the Arduino Mega boards/DFRobot ADK/Arduino ADK
    • Extended TTL connection pins for four Serial ports
    • DIP prototyping area makes it easy to add more chips or electronic components
    • 3 Xbee slots
    • 1 microSD slot
    • power selector to select between Arduino Mega power or external power
    • Size:125 x 57 mm

    Documents

    Schematics

    Saber más
  • SparkFun ProtoShield Kit

    SparkFun ProtoShield Kit

    Excl. Tax: € 12,00 Incl. Tax: € 14,52

    Kit Includes:

    • 1x ProtoShield bare PCB
    • 2x Stackable Headers 6-pin
    • 2x Stackable Headers 8-pin
    • 2x 5mm Basic Yellow LEDs
    • 2x 330 Ohm resistors
    • 1x 10k resistor
    • 2x Momentary push buttons
    • 2x 0.1uF Ceramic Capacitors

    Features:

    • All Arduino pins are brought to the top level
    • 5V, GND, and Vin pins are exposed as well
    • BlueSMiRF socket for wireless communication between Arduinos
    • 2 general use LEDs
    • 1 general use button
    • Reset button brought to top level

    Documents:

    Saber más
  • Input Shield for Arduino

    Input Shield for Arduino

    Excl. Tax: € 17,00 Incl. Tax: € 20,57

    Input Shield incluye un joystick de 2 ejes, así como 2 botones de color. La placa se conecta fácilmente a Arduino mediante sus pines.

    Documentos

    Esquemáticos

    Saber más
  • LCD Keypad Shield For Arduino

    LCD Keypad Shield For Arduino

    Excl. Tax: € 16,00 Incl. Tax: € 19,36

    Introduction

    This is a very popular LCD Keypad shield for Arduino or Freeduino board. It can be directly plug onto the Arudino board, no soldering or fly-wiring needed. A 16x2 HD44780 compatible LCD, White character & Blue backlight.

    This Shield uses Arudino LCD4Bit library.

    Documents

    Saber más
  • IO Expansion Shield For Arduino (V7.1)

    IO Expansion Shield For Arduino (V7.1)

    Excl. Tax: € 18,00 Incl. Tax: € 21,78
    The new IO Expansion Shield V7 has arrived,from the best selling family of IO expansion shield for Arduino. For the past few years these expansion shields have been aiding thousands of makers to create,to expand, to share their sparkles of idea and ingenuity, and now comes the young V7.
     
    The new IO Expansion Shield V7 not only heritages the advantages, but also enjoys numerous new features:
    • Compatible with the new Arduino Due
    • 3.3V/5V operating voltage select
    • Switch for wireless communtcation & programme
    • More Easily recognitive interfaces
    • Colorful header for illustrating digital or analog pins
    • Immersion gold surface
     
    Specification
    • Compatible with Arduino UNO,Mega,DUE...
    • 3.3V voltage output interface
    • I2C interface 
    • Support Xbee (Xbee pro)
    • Support Bluetooth
    • Support APC220
    • Support SD card read/write
    Saber más
  • Nano I / O Shield For Arduino Nano

    Nano I / O Shield For Arduino Nano

    Excl. Tax: € 6,60 Incl. Tax: € 7,99

    The Arduino Nano I/O Shield acts as a breadkout board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input and the footprint of the DFRduino board is the same as the Arduino Duemilanove. In addition, each pinout includes 5V and GND pins for easy connection to sensors or servos. Unit comes fully assembled.

    NOTE:This shield only support Nano 2.0/2.3.  There is small issue with latest v3.0 Nano on IO Shield.  Check out this link.

    Specification

    • Power supply: +5 V
    • Size: 69x54mm

    Documents

    Saber más
  • Screw Shield For Arduino

    Screw Shield For Arduino

    Excl. Tax: € 7,50 Incl. Tax: € 9,08

    Screw Shield es una placa de expansión con terminales para atornillar y obtener una terminación fiable y robusta. Se puede conectar directamente en Arduino. Obtén conexiones seguras con esta placa.

    Saber más
  • 160 Artículo(s)

    por página

    Cuadricula  Lista 

    Configurar sentido descendente